Owner`s manual

25
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 72-73.
Basic Operation








Main Menu
Sub-Menu


 Image select
For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.37).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,
Colorboard and Image 1- 4 (p.44).

Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),
Sharpness and Gamma] (pp.38-39).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.45-46).
 PC adjust
Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust
the parameters to match with the PC input signal format (p.33-36).

Screen
For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/–]
(pp.39-40).
For Video source, used to set size of image [Normal, Wide and Custom] (p.47).
 Input
Used to select an input source from Computer 1, Computer 2, Video, S-video or Network (pp.31-32, 41-42).
 Sound
Used to adjust the volume or mute the sound (p.28).
 Information
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.62).
 Guide
The key operation is displayed.

Setting
Used to set the projector’s operating configurations (pp.48-61).
 Network
See the owner’s manual of “Network Set-up and Operation”.