Owner`s manual

10
Part Names and Functions
Rear Terminal
⑧ S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.18).
⑪ AUDIO IN
Connect the audio output signal from video
equipment connected to ⑧ or ⑫ to this jack.
For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack (p.18).
⑩ COMPUTER 1 COMPONENT / COMPUTER 2
AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to ③,
④ or ⑤ to this jack. (pp17, 19)
⑫ VIDEO IN
Connect the composite video output signal to
this jack (p.18).
③ COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to
this terminal (pp.17,19).
⑨ AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.17-19).
This terminal outputs sound from AUDIO IN
terminal (⑩ or ⑪).
⑥ LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
of “Network Set-up and Operation”).
① USB Connector (Series B)
This terminal is switchable. Set up this terminal
as either "Mouse control" (p.15) or "USB display"
(refer to "Network Set-up and Operation") in "USB
terminal" of "Setting" menu.
⑦ USB Connector (Series A)
Connect the USB menory (refer to the owner’s
manual “Memory Viewer function”).
② ③① ④ ⑥
⑦⑪ ⑧⑩
② CONTROL PORT
When controlling the projector with RS-232C,
connect the control equipment to this connector with
the serial control cable.
⑨⑫
⑤
⑬ R/C JACK
When using the wired remote control, connect
the wired remote control to this jack with a remote
control cable (supplied).
④ MONITOR OUT
This terminal can be used to output the incoming
analog RGB and component signals from
COMPUTER IN 1/COMPONENT IN or COMPUTER
2/DVI-I terminal to the other monitor (p.17).
⑤ COMPUTER IN 2 / DVI-I
Connect computer output (Digital/Analog DVI-I type)
to this terminal (p.17).
⑬