Owner`s manual

94
Chapter 8 Network capture functions
Error information
Error messages Cause and corresponding
Cannot be displayed as PJ is under
display.
Error when Start real time capture is executed. The other capture, viewer or
memory viewer function is now operating.
➔ Wait until the communication function is available.
Cannot connect to PJ.
Cannot establish the connection with the projector when Capture transfer,
Start real time capture or Terminate capture is executed.
➔ Check connection of the network cable.
Cannot transfer data to PJ.
Cannot transfer the data to the projector when Capture transfer, Start real
time capture or Terminate capture is executed. The time-out period is 10
seconds.
➔ Check the connection of the network cable.
Invalid port number
When the parameter is set, the reserved port number is specified.
➔ Check the parameter setting (☞p.88)
✐ The Capture transfer is Windows-compliant, but non-Mac-compliant.