Owner`s manual

70
Chapter 7 Controlling the projector
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal from the
computer connected to the projector to obtain the proper picture image on the
screen.
Item Description
Current mode ........... Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA,
WXGA, etc. or MODE1 - MODE5 are the customized mode
created by using the "Mode Store" function described below.
Auto PC adj. ............. Per
forms automatic adjustment.
Fine sync. .................. Per
forms Fine Sync adjustment.
Total dots .................. Adjust the number of t
otal dots in the horizontal period.
Clamp.........................Adjusts the phase of the clamp.
Display area
H or
izontal ...............Adjusts the image area horizontally.
Ver
tical .................Adjusts the image area vertically.
Item Description
Position
Hor
izontal ........... A
djusts the horizontal position of the screen.
Vertical .................Adjusts the vertical position of the screen.
Reset ........................... R
esets the PC adjustmen
ts to the previous levels.
Mode Store .............. St
ores the PC adjustment values. Select a mode no.
[Mode1 - Mode5] from the pull-down menu.
Mode Free ................ Clear the PC adjustmen
t v
alues. Select a mode no.
[Mode1 - Mode5] from the pull-down menu.