Owner's Manual Memory Viewer function This is the manual for the Memory Viewer function. Read this manual thoroughly to operate the Memory Viewer function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed strictly. Some functions are non-Mac-Compliant.
Memory viewer function Memory Viewer function The Memory Viewer function is to make a presentation or project an image without using computers or some other external equipment. You do not have to carry a computer or other equipment to project images. Store images on a dedicated SD memory card and insert it into the SD memory card slot of the projector, then you can project those images.
Memory card for the Memory Viewer function The memory card is not provided with this projector. The types of memory card which can be used with the Memory Viewer function of this projector is "SD Memory Card". It may not be used with this projector depending on the type of the SD memory card. A new SD memory card or a card formatted by computer or camera must be formatted by this projector. The Memory Viewer function may not operate properly with a card formatted by other equipment.
Memory viewer function Inserting and removing the SD memory card Insert the SD memory card into the card slot on the back side of the projector as shown in the figure below. Push the SD memor y card in the arrow direction gently to remove. The card comes out and you can remove it. Insert a card with cutting side up until it clicks. Push the card until it clicks. The card comes out.
Entering the memory viewer mode 1. Select “Wired” or "Wireless" from the input menu of the projector. The “Please wait...” message will be displayed on the screen. After short time, the network connection standby display screen "Ready for use" will appear. 2. Insert the SD memory card into the card slot on the back side of the projector. The card indicator lights up. 3. Select “Wired setting” or "Wireless setting" in the projector menu, and press SELECT button.
Memory viewer function Displaying the memory viewer browser window When you press AUTO SETUP/CANCEL button in the memory viewer mode, following browser window "Thumbnail" or "Filename list" appears on the screen. Thumbnail display Displays current directory path Menu Filename list display Displays current directory path Menu Moves to upper directory * Even before the completion of thumbnail images drawing, the image selection is available by pressing point ed 7 8 buttons.
Menu tree Menu Sub menu Description Menu Manual mode Mode to select a playing file respectively Available file types are JPEG(.jpg), Bitmap(.bmp), Text(.txt). Others are not available. Program mode Mode to select a program file (.dpf ) created by the program editor. * This mode is non-Mac-compliant. Format Formats the SD memory card View Thumbnail Displays files with the thumbnail on the browser window. Filename list Displays files with the file name on the browser window.
Memory viewer function Image viewer in the manual mode 1. Select "Manual mode" from "Menu" on the browser window of the memory viewer and press SELECT button. 2. S elect a file to display with point buttons and press SELECT button. The selected file image is displayed on the screen. 3. During displaying the image, you can control the displayed image with control buttons as described in the table below.
Image viewer in the program mode for Windows 1. Select "Program mode" on "Menu" of the browser window of the memory viewer. And press SELECT button. The program files (.dpf ) in the DispParam folder under the top directory are displayed. * If the DispParam folder is not placed in the top directory, the list of the folder name is displayed. Find the DispParam folder which stores the program file manually to display the contents of the folder. 2.
Memory viewer function Duplicating the data into the SD memory card for Windows It is described how to duplicate the data converted with the Network Viewer 5 [File Converter 1, File Converter 2] into the SD memory card through the network. 1. Launch the explorer software of the computer and type the IP address of the projector which has the SD memory card onto the address column. For example, "ftp://192.168.1.201". The contents of the SD memory card appear on the explorer window as below. 2.
* The data converted by the Network Viewer 5 [File Converter1] can be stored into the SD memory card mounted on the projector directly. For further information, refer to chapter Network Viewer function, "Setting of output destination and conversion mode" (p.113) described on the separated Network Owner's manual for Windows. * The program file created by the Program Editor can be stored into the SD memory card mounted on the projector directly.
U.S.A. Canada EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com EIKI CANADA - Eiki International, Inc. P. O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : canada@eiki.