MULTIMEDIA PROJECTOR MODEL LC-X71 LC-X71L (Lensless) OWNER’S MANUAL
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This projector should be operated only from the type of power source indicated on the marking label.
COMPLIANCE Federal Communication Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TABLE OF CONTENTS FEATURES AND DESIGN PREPARATION NAME OF EACH PART OF PROJECTOR SETTING-UP PROJECTOR CONNECTING AC POWER CORD POSITIONING PROJECTOR LENS INSTALLATION ADJUSTABLE FEET INSTALLING PROJECTOR IN PROPER POSITION MOVING PROJECTOR CONNECTING PROJECTOR TERMINALS OF PROJECTOR CONNECTING TO COMPUTERS CONNECTING TO VIDEO EQUIPMENT 6 7 7 8 8 9 9 10 10 11 12 12 13 14 BEFORE OPERATION 15 REMOTE CONTROL OPERATION 15 LASER POINTER FUNCTION REMOTE CONTROL BATTERIES INSTALLATION TOP CONTROLS AND INDI
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design This projector is extremely compact in size and weight. It is designed to carry and work anywhere you wish to use.
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET SPEAKERS TOP CONTROLS AND INDICATORS PROJECTION LENS ✽ Optional: LC-X71L CAUTION Do not turn on the projector with the lens cap attached. High temperature from light beam may damage the lens cap and result in fire hazard.
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200240 V AC and it automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station.
PREPARATION POSITIONING PROJECTOR NOTE: The figures below are only for the Model LC-X71. The projection lens is not provided with the Model LC-X71L. ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 4.6’ (1.4 m) ~ 48.3’ (14.7 m). ● Refer to the figure below to adjust the screen size. A ROOM LIGHT Brightness in a room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image. 47.3’(14.
PREPARATION ADJUSTABLE FEET Projection angle can be adjusted up to 10.5 degrees with the ADJUSTABLE FEET. 1 Lift the front of the projector and pull the FEET LOCK LATCHES in each side of the projector. 2 Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to a proper height, and tilt. 3 To retract the ADJUSTABLE FEET, lift the front of the projector and pull and undo the FEET LOCK LATCHES.
PREPARATION MOVING PROJECTOR Use the Carrying Handle when moving the projector. Replace the lens cap and retract the ADJUSTABLE FEET when moving the projector to prevent damages to the lens and cabinet. When this projector is not in use for an extended period, put it into a suitable case (not supplied with this projector). CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR ● Do not drop or bump the projector, otherwise damages or malfunctions may result.
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to the figures on pages 12 to 14 and connect properly. COMPUTER AUDIO INPUT 1/ AUDIO MONITOR OUTPUT JACK This terminal is switchable and can be used as Computer Audio Input 1 or Audio Monitor Output (variable). Set up the terminal as either Computer Audio Input 1 or Audio Monitor Output properly before using this terminal. (See pages 13 and 24.
CONNECTING PROJECTOR CONNECTING TO COMPUTERS Cables used for connection (✽ = Cables or adapters not supplied with this projector.) • VGA Cable (HDB 15 pin) • Control Cable for PS2 Port ✽, or ADB Port ✽ • USB Cable • DVI-Digital Cable (for Single Link T.M.D.S.
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cables not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ • Audio Cable {Mini Plug (stereo)} ✽ • Scart Cable ✽ Video Source (Example) Component video output equipment.
BEFORE OPERATION REMOTE CONTROL OPERATION LASER POINTER (DRAG ON) INDICATOR Left Side POWER ON-OFF BUTTON Lights red while the laser beam is emitted from the Laser Light Window. Lights green when dragged to the “ON” position. (p.45) AUTO AUT O PC P ON-OFF D.ZOOM FREEZE NO O SHOW SHOW LOCK MUTE BUTTON Used to mute the sound. (p.23) Used to turn the projector on or off. (p.
BEFORE OPERATION D.ZOOM BUTTON Used to select the DIGITAL ZOOM +/– mode and resize the image. (p.30) AUTO AUT O PC P ON-OFF D.ZOOM FREEZE NO O SHOW SHOW SELECT BUTTON LOCK Used to execute the selected item, or expand/ compress the image in the DIGITAL ZOOM +/- mode. (p.30) MUTE IMAGE VOLUME- SELECT VOLUME VOLUME VOLUME+ KEYSTONE TONE MENU Used to turn the picture into a black image. (p.23) FREEZE BUTTON Used to freeze the picture. (p.
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. TOP CONTROLS AND INDICATORS EXT. SP SWITCH Used to select speakers. (Internal or External) MENU BUTTON SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON Used to open or close the On-Screen Menu. (p.18, 19) Used to execute the selected item. It is also used to expand/compress the image in the DIGITAL ZOOM mode. (p.30) Used to turn the projector on or off. (p.
BEFORE OPERATION ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector with the OnScreen Menu. Refer to the relevant pages to operate each adjustment. REMOTE CONTROL AUTO AUT O PC P ON-OFF 1. DISPLAY MENU Press the MENU button to display the On-Screen Menu. ✽ The Pointer is an icon in the On-Screen Menu for selecting an item. See figures in “FLOW OF ON-SCREEN MENU OPERATION” below. 3.
BEFORE OPERATION MENU BAR FOR PC SOURCE Press the MENU button when connecting to the PC input source. PC SYSTEM MENU GUIDE WINDOW Shows the selected item of On-Screen Menu. Used to select a computer system. (See pages 24 and 25.) INPUT MENU Used to select an input source (Input 1, Input 2, or Input 3). (See page 24.) FOR VIDEO SOURCE IMAGE SELECT MENU SCREEN MENU SETTING MENU Used to select an image level among Standard, Real, and Image 1 ~ 10. (See page 29.) Used to adjust the size of an image.
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON THE PROJECTOR 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector’s AC power cord into an AC outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. 3 Press the POWER ON-OFF button on the top control or on the remote control. The LAMP indicator dims, and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.
BASIC OPERATION TURNING OFF THE PROJECTOR 1 Press the POWER ON-OFF button on the top control or on the remote control, and “Power off?” appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The LAMP Indicator lights bright and the READY Indicator turns off. After the projector is turned off, the cooling fans operate (for 90 seconds). During this “cooling down” period, the projector cannot be turned on. 3 “Power off?” disappears after 4 seconds.
BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press the ZOOM button on the top control or ZOOM ▲/▼ buttons on the remote control. “Zoom” appears on the screen. 2 Press the ZOOM ▲ button or POINT UP button to make the image larger, and press the ZOOM ▼ button or POINT DOWN button to make the image smaller. “Zoom” disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press the FOCUS button on the top control or FOCUS ▲/▼ buttons on the remote control. “Focus” appears on the screen.
BASIC OPERATION PICTURE FREEZE FUNCTION Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. NO SHOW FUNCTION Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. “No show” disappears after 4 seconds. P-TIMER FUNCTION Press the P-TIMER button on the remote control.
COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERATION INPUT button Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. If the projector cannot reproduce proper image, select a correct input source by MENU OPERATION (see below). NOTE: • Input 1 terminal is switchable and can be used as Computer Input or Monitor Output. ✽ Input 1 Input 2 Input 3 ✽ Input 1 is not displayed when the Input 1 is used as Monitor out.
COMPUTER INPUT WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS ) When connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from a computer to G, B, R, H/HV, and V jacks: INPUT MENU INPUT Menu icon 1 2 3 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 2 and then press SELECT button.
COMPUTER INPUT PC ADJUSTMENT AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Auto PC Adjustment function can be operated as follows. Auto PC adj. 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the PC ADJUST Menu icon. 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the AUTO PC adj.
COMPUTER INPUT MANUAL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which may not be tuned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce proper image and it may be recognized as a flickering; non-synchronized; non-centered; or skewed picture.
COMPUTER INPUT Reset To reset the adjusted parameters, select Reset and press the SELECT button. A confirmation box appears. Select [Yes]. All the adjustments return to their previous figures. To store adjustment data. This Mode has parameters being stored. Mode free To clear adjusted parameters previously set, move the red frame pointer to the Mode free icon and then press the SELECT button. Move the red arrow pointer to a Mode that you want to clear and then press the SELECT button.
COMPUTER INPUT PICTURE IMAGE SELECT IMAGE LEVEL SELECT DIRECT OPERATION Select an image level from among Standard, Real, and Image 1 to Image 10 by pressing the IMAGE button on the top control or on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu. (p.
COMPUTER INPUT PICTURE SCREEN ADJUSTMENT PICTURE SCREEN SELECT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon. 2 Press the POINT UP/DOWN buttons and move the red frame pointer to the desired function and then press the SELECT button.
VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION INPUT button Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. If the projector cannot reproduce proper image, select a correct input source through MENU OPERATION (see below). Input 1 Input 2 Input 3 ✽ Input 1 is not displayed when the Input 1 is used as Monitor out.
VIDEO INPUT SELECTING VIDEO SYSTEM 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon. 2 Press the POINT UP/DOWN buttons to move the red arrow pointer to the desired system and then press the SELECT button. VIDEO JACK OR S-VIDEO JACK Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. PAL / SECAM / NTSC / NTSC4.
VIDEO INPUT PICTURE IMAGE SELECT IMAGE LEVEL SELECT DIRECT OPERATION Select an image level from among Standard, Cinema, Image 1 to Image 10 by pressing the IMAGE button on the top control or on the remote control. Standard Normal picture level preset on this projector. IMAGE button Standard Cinema Image 1 Cinema Picture level adjusted for picture with fine tone. Image 10 IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu. (p.
VIDEO INPUT PICTURE SCREEN ADJUSTMENT PICTURE SCREEN SELECT This projector has a picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon. 2 Press the POINT DOWN button and move the red frame pointer to the desired function and then press the SELECT button.
PICTURE IMAGE PICTURE IMAGE ADJUSTMENTS 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired item and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT buttons.
PICTURE IMAGE COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the top control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. MENU Return to the IMAGE ADJUST Menu. But any settings that have been changed will not be stored.
PICTURE IMAGE White balance (Red) Press the POINT LEFT button to lighten red tone; press the POINT RIGHT button to deepen red tone. (From 0 to 63.) White balance (Green) Press the POINT LEFT button to lighten green tone; press the POINT RIGHT button to deepen green tone. (From 0 to 63.) White balance (Blue) Press the POINT LEFT button to lighten blue tone; press the POINT RIGHT button to deepen blue tone. (From 0 to 63.) Press the SELECT button at this icon to display other items.
SETTING SETTING MENU This projector has Setting menu that allows you to set up the other various functions described as follows: 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the Setting Menu icon. 2 Press the POINT DOWN button to move the red frame pointer to the desired item that and then press the SELECT button. The Setting dialog box appears.
SETTING Logo Logo This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Logo select This function decides the start-up display as follows: User . . . the image you captured Default . the factory-set logo Off . . . . count-down only Capture This function enables you to capture the image being projected and use it for a starting-up display. After capturing the projected image, go to the Logo select function and set it to “User.
SETTING Ceiling Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceilingmounted projector. Rear When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen. Rear Anamorphic When this function is “On,” the screen image is forcibly changed to the 4:3 image, even if the input signal is HDTV.
SETTING On start When this function is “On,” the projector is automatically turned on just by connecting the AC power cord to an AC outlet. NOTE: • Be sure to turn the projector off properly (see “TURNING OFF THE PROJECTOR” on page 21). If the projector is turned off in the incorrect sequence, such as unplugging the AC power cord before completing the cool-down etc., the On start function does not operate properly. Lamp control This function allows you to change the brightness of the screen. . . . .
SETTING USB This Projector has a USB port for interactive operation between the projector and computers. Set the mode by following the steps below. Wireless Mouse mode Select “ ” when controlling a computer with the remote control of this projector. Projector mode: “ ” Not used. Security Security Key lock This function locks operation of the top control and remote control. It helps to prevent operation by an unauthorized person. . . . . unlocked. . . . . locks operation of the top control.
SETTING PIN code lock PIN code lock This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options. Off . . . . the projector is not locked with the PIN code. On1 . . . requires to enter the PIN code every time turning on the projector. On2 . . . requires to enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.
SETTING Lamp counter Factory default This function is used to reset the Lamp replacement counter. When replacing the projection lamp, reset the Lamp replacement counter with this function. See page 49 for operation. Factory default This function returns all setting values except for the User logo, Key lock, PIN code lock, Logo PIN code lock, and the Lamp counter to the factory default settings. Select Factory default and this box appears. Select [Yes], and the next box appears.
APPENDIX WIRELESS MOUSE Remote control is not only able to operate this projector but also functions as a wireless mouse for most personal computers. The MOUSE POINTER, DRAG ON/OFF button, and two CLICK buttons are used for wireless mouse operation. The Wireless mouse function is available only when the PC mouse pointer is displayed on the screen. INSTALLATION To use the remote control as a wireless mouse for a computer, installation of a mouse driver (not supplied) is required.
APPENDIX MAINTENANCE WARNING TEMP. INDICATOR The Warning Temp. indicator blinks red to let you know the internal temperature of the projector exceeds a normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator goes out. (The Warning Temp. indicator continues blinking.) After the cooling-off period, the Ready indicator lights on again and the projector can be turned on by pressing the POWER ON/OFF button on the top control or the remote control.
APPENDIX AIR FILTERS CARE AND CLEANING Air filters help prevent dust from accumulating on the optical elements inside the projector. To whatever extent the air filters become clogged with dust particles, the cooling fans’ effectiveness is reduced, which may result in an internal heat build-up and adversely affect the life of the projector. Therefore, for appropriate care and use of the projector, regular cleaning of the air filters is necessary.
APPENDIX LAMP REPLACEMENT When the projection lamp of this projector reaches its end of life, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. TOP CONTROL This indicator lights yellow when the projection lamp reaches its end of life. Replace the projection lamp with a new one promptly. CAUTION CAUTION Allow the projector to cool for at least 45 minutes before you open the lamp cover.
APPENDIX LAMP REPLACE COUNTER Be sure to reset the Lamp replacement counter after the lamp assembly is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. 1 Turn the projector on and press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SETTING Menu icon. 2 Press the POINT UP/DOWN buttons to move the red frame pointer to Lamp counter and then press the SELECT button. The next box appears.
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in “CONNECTING PROJECTOR” on pages 12-14. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected. 3. Make sure that all power is switched on. 4. If the projector still does not produce an image, restart your computer. 5.
APPENDIX Problem: Try these Solutions Remote control does not work. ● Check the batteries. ● Check if the ALL-OFF switch on the remote control is set to “ON.” ● Make sure there is no obstruction in between the Infrared remote receiver of the projector and the remote control. ● Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4’ (5 m). ● Check the remote control code in the remote control. (See“SETTING” on page 41.
APPENDIX MENU TREE Computer Input/Video Input Input Input 1 Go to System (1) RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (AV HDCP) Monitor out Input 2 Input 3 Video Go to System (2) Y, Pb/Cb, Pr/Cr Go to System (3) RGB Go to System (1) Video Go to System (2) Y, Pb/Cb, Pr/Cr Go to System (3) S-Video Go to System (2) Computer Input System (1) Image Select Mode 1 Standard Mode 2 Real SVGA 1 Image 1 SVGA 2 SVGA 3 Image 10 ✽ System displayed in the System Menu varies depending on
APPENDIX Video Input Computer Input/Vide Input System (2) Setting Auto English Language PAL German SECAM French NTSC Italian NTSC 4.
APPENDIX COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V-, H-Frequency mentioned below, and less than 140 MHz of Dot Clock.
APPENDIX When a input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA1 D-WXGA2 D-WXGA3 D-WXGA5 ✳ D-SXGA1 RESOLUTION 640 x 480 720 x 480 (Progressive) 768 x 575 (Progressive) 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1368 x 768 1280 x 1024 H-Freq. (kHz) V-Freq. (Hz) ON-SCREEN DISPLAY 31.47 31.47 31.25 37.879 43.363 48.36 47.70 48.36 46.50 63.98 59.94 59.88 50.00 60.32 60.00 60.00 60.00 60.00 50.00 60.
APPENDIX Indicators LAMP REPLACE yellow WARNING TEMP. red READY LAMP green red Projector Condition The projector is in cooling mode. It cannot be turned on until the READY indicator lights green. ✽ The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on.
APPENDIX TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Lens Throw distance Motorized Lens Shift Multi-media Projector Projection Image Size (Diagonal) Adjustable from 31” to 400” Horizontal Resolution Projection Lamp Input 1 Jacks 800 TV lines (HDTV) Input 2 Jacks BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H/V, and V), Stereo Mini Type Jack (Aud
APPENDIX CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal: HDB15-PIN Pin Configuration 4 5 10 15 14 2 3 9 8 13 1 7 12 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input Sense 2 Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 +5V Power Ground (Vert. sync.) Sense 0 DDC Data Horiz. sync. Vert. sync.
APPENDIX OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, specify the item name and its Type No. to the sales dealer. ● DVI Cable Type No. : KA-DV20 ● HDB 15 pin-SCART 21 pin Cable Type No. : AH-98881 ● Long Zoom Lens Type No. : AH-23132 ● Ultra Long Zoom Lens Type No. : AH-24241 ● Short Zoom Lens Type No. : AH-23122 ● Short Fixed Lens Type No. : AH-32011 ● Remote Control Cable Type No. : POA-CA-RC30 ● Pj-to NetDirector Type No.
APPENDIX PIN CODE NUMBER MEMO Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to use the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid. While the projector is locked with the PIN code...
APPENDIX DIMENSIONS 12.6 (319.0) Unit : inch (mm) 3.60 (91.5) 2.39 (60.6) 6.72 (170.8) 5.59 (142.0) 5.57 (141.5) 17.1 (435.5) 10.5° 4.61 (117.0) 9.06 (230.0) 5.79 (147.0) 5.28 (134.0) 4.49 (114.0) 4.55 (115.5) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 3.74 (95.
A-key to better communications U.S.A. Canada EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : canada@eiki.
