Owner`s manual

64
Troubleshooting
Indicator
The power and lamp indicators show the status of the projector. Before requesting repair,
check the projector status using the chart below. If the problem cannot be resolved,
contact your dealer.
In normal status~~~
POWER LAMP
CONDITIONS DESCRIPTION
Blinking In
Green
Off Stand by mode
Projector is ready to be turned
on.
Lighting In
Green
Off On mode Projector is on and operating.
Lighting In
Green
Blinking In Red
( Slow )
Cool down mode
Projector is in cool down mode
and will not respond to user
input.
Lighting In
Green
Blinking In Red
( Fast )
Cool down mode
When the projector is turned on
in 2 minutes after it was turned
off.
In abnormal status~~~
POWER LAMP
CONDITIONS DESCRIPTION
Blinking In
Green
Blinking In Red
( Fast )
Fan fault mode
The projector has detected a
problem of a slow internal fan
speed. The lamp will shut off
automatically. Contact your dealer.
Blinking In
Green
Lighting In Red Lamp cover open
The lamp cover is open or not
closed well. Please check lamp
cover again.
Blinking
In
Green (Fast)
Blinking In Red
( Fast )
High temperature
The projector has overheated and
shut itself down.
Correct the over temperature
condition immediately.
1. Check that the ventilation slots
are free from obstructions.
2. Check the cleanliness of the air
filter.
Blinking In
Green (Slow)
Blinking In Red
(Slow)
Lamp fail
The lamp does not light. Come
to "stand by mode", and press the
power button again. If the situation
is the same, please contact your
dealer.