Owner`s manual

59
Network Control Software Application-Software Control

Network Control Window introduction
Icon Name Description
Scan all
Capture the all registered projectors’ information one
time only.
Start Auto Scan
According to the system setting, get the projector
information automatically.
Stop Auto Capture Stop scanning the projector information.
Auto Search
Search the projector in the same network to register
and modify the setting.
Open Project File Open project file which was saved.
Save Project File Save the registered projector in this project.
System Setting Setting the projector system reminder message.
About Icon content description.
Exit Exit the Network software.
Register projector Register projector’s information.
Exit Cancel registered information.