Owner`s manual

Network Control Software Application-Software Control

Projector Auto Search.



Click the

(Projector search), then the Search Window below appears.



Click

(search again), then the target projectors will be listed as follows.

NOTE

If the security warning window appears, please select "Unblock" to allow the

Network Control software to work.

NOTE

If there is no projector found on the display window, the following maybe the causes:

1. There is no DHCP server available on the LAN. The LAN module is shipping

with DHCP-conﬁgured client enabled in default.

2. If there is no DHCP server available on the LAN. The LAN module default IP

address should be 169.254.1.1. Please modify the PC/Laptop IP address setting to

make the PC/Laptop IP address located on the same segment as 169.254.xxx.xxx

and try again .