Owner`s manual

24
MENU (PC Mode)
Setting Menu
Step:
1. Use the ▲ /▼buttons
to select an item.
2. Use the ◄ / ► buttons
to select an item or
adjust the value.
Item Selection Description
H POSITION 000/100
Move the image position horizontally.
This function can be used under computer signal input only.
V POSITION 000/100
Move the image position vertically.
This function can be used under computer signal input only.
PHASE 000/100 Adjust the image sharpness.
FREQUENCY 000/200 Set the horizontal scanning frequency.
AUTO
KEYSTONE
OFF/ON Correct keystone distortion in image automatically.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually.
AUTO SYNC EXECUTE Set all of the above setting automatically.
AUTO SEARCH OFF/ON Search signal source manually or automatically.
KEYPAD
BEEP
OFF/ON
Turn the Beep of Keypad OFF / ON..
* H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC does not work for Digital
RGB signal.
* The setting data in this Setting Menu is not shown correctly if no signal is fed and projected.