Owner`s manual

16
Setting Up
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image height.
1
Holding the projector, push the foot adjust
buttons to loosen the front adjustable foot.
12
Position the front side of the projector to the
desired height.
3
Release the foot adjust buttons in order to
lock the front adjustable feet.
14
Please make sure that the front adjustable
feet are locked.
Please rotate the adjustable feet when fine
adjustment of tilt is needed.
CAUTION
* The adjustment range of front adjustable
foot is 0 to 7 degrees.
* When the feet are adjusted, it may cause
the shape of the projected image to become
distorted. Use the keystone correction
function to correct this distortion.
15