LC-WIP3000 OWNER'S MANUAL
Projector About the Owner’s Manual Please read the owner’s manual thoroughly to ensure correct usage of the projector and its features. After reading, store the owner’s manual in a safe place for future reference. Features 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Contents Contents About Owner’s Manual Contents .............................................................................................................................................1 Contents of Your Box ........................................................................................................................ 3 Safety Instructions ............................................................................................................................4 Safety Labels..................
Contents Network Control Software Application-Browser Control ..........................................................40 Auto IP address setting...................................................................................................40 Item Setting description..................................................................................................41 Status .............................................................................................................................
Contents of Your Box Safety Instructions Contents of Your Box Please make sure that following items are included in the box. If any items are missing, contact your dealer please.. 1. Projector 2. Remote control 3. Owner’s Manual CD 4. Quick Start Guide 5. Power cord 6. Computer cable 7. USB Cable 8.
Safety Instructions The projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death. CAUTION This symbol indicates information that, if ignored, could result in personal injury or physical damage.
Safety Instructions WARNING If a problem should occur If smoke or strange odors arise, continued use could result in fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer for repairs. Never attempt to make repairs yourself because this is dangerous. Do not use this projector if there is no image or sound, or if the sound is distorted.
Safety Instructions WARNING Do not look through the lens when the lamp is on. Never look through the lens when the lamp is on. The powerful light could adversely affect vision. Use special caution in households where children are present. Avoid shock or impact on the projector. If the projector should fall, resulting in damage to the cabinet, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer. Continued use could result in fire or electrical shock.
Safety Instructions CAUTION Placing heavy objects on top of this projector could result in loss of balance or falling and cause personal injury or damage the projector. Do not block the ventilation openings of this projector. Blocking ventilation could lead to internal overheating which could result in fire. Do not place this projector on its side during use or push it into a small, poorly ventilated location. Do not place this projector on a carpet or bedding or cover it with a tablecloth, etc.
Safety Labels Safety Labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention.
Part Names Part Names Projector 1 Touch Keypad Operating system. 1 12 Filter cover Prevents dust and other foreign particles from being drawn into projector. Remove the filter cover to clean the air filter. Front IR receiver 3 Foot adjust button Lock / unlock the adjustable foot. 4 Front adjustable foot 1 Extend and retract to adjust the projection angle. 5 4 3 15 Lens Cover 2 Attach when not using to protect the lens from becoming dirty or damaged.
Part Names Touch Keypad 15 16 9 9 14 10 13 11 12 14 1 INPUT 9 VOLUME + / - Select input source: Sound louder or lower. RGB 1 S-Video 10 1 MENU RGB 2 HDMI Video Y,Pb,Pr Display or hide the OSD main menu Note : 11 AUTO If the projector can not be captured the signals within 15 minutes, it will be shut down automatically. Automatically adjust the setting to match the current input. 12 1 (POWER) 15 1 POWER INDICATOR Power On / Off.
Part Names Rear A B P C O D N E M A REAR IR RECEIVER F G L H I J K I LAN Please see page 38 Network Control Application for details. B USB Connect a USB cable to a computer to control computer Interactive functions. C RS232 Serial data port for controlling the projector with a computer or other RS-232 control device. D AUDIO IN 1 & O AUDIO IN 2 Mini jack port corresponds to computer input.
Setting Up Setting Up Arrangement 1. Before installation, make sure that the projector is turned off and the power cord is disconnected. 2. Do not set up and move the projector, while it is hot. 3. The distance between the projector and screen determines the actual image size. Refer to the table below to determine the screen size at a given distance. Note: The dimensions in the table below are approximate. Projection size (inch) Projection distance (cm) Offset (cm) 50 65.0 14.81 60 79.0 17.
Setting Up Turning On The Power Power ON / OFF 1. Make sure that power cord is firmly and correctly connected to the projector. 2. The green Power indicator blinks slowly. 3. Remove the lens cover. Outlet AC inlet 4. Press POWER button on the Touch Keypad or the remote control to turn on the projector. 5. Rotate the focus ring to adjust the focus. WARNING A strong light is emitted when the projector’s power is on.
Setting Up Setting Up The Projector The projector supports the following four different projection methods. 2. Rear projection 1. Front projection 3. Rear ceiling projection 4. Front ceiling projection 90˚ 180˚ 0˚ The projector can be installed pitched by any angle (360 degree) without any setting in fan mode. As for rolling it must be within 10 degree. 270˚ Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details.
Setting Up Ceiling Mounted Installation Guide Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details. MAX M4x8 mm For Mounting Security Anchor The product is equipped with security anchor and PIN LOCK (See page 33 for detials) functions to help prevent unauthorized removal of the projector.
Setting Up Adjusting The Projector’s Elevation Use the adjustable foot at the front of the projector to set the image height. 1 Holding the projector, push the foot adjust buttons to loosen the front adjustable foot. CAUTION 12 Position the front side of the projector to the desired height. 3 Release the foot adjust buttons in order to lock the front adjustable feet. 4 1 Please make sure that the front adjustable feet are locked.
Setting Up How To Connect Laptop or desktop computer MOUSE RS-232 AUDIO OUT VGA OUT AUDIO OUT HDMI VGA OUT RGB IN Speaker or DVD Player HDMI S-VIDEO OUT Y Pb/Cb Pr/Cr VIDEO OUT AUDIO OUT (L)&(R) Before starting, make sure that the projector and computer are both turned off. Connect the computer Connect the computer cable from the computer to the projector's RGB IN. Connect a computer cable from the MONITOR OUT to an external monitor to view the signal on RGB IN.
Setting Up How To Connect Laptop or desktop computer Connect the audio cable if necessary 1. Please connect the audio cable to the AUDIO IN 1 if the computer cable is connected to the projector's RGB IN. 2. Please connect the audio cable to the AUDIO IN 2 if the computer cable is connected to the projector's RGB2. 3. Please connect the audio cable to the AUDIO IN 3 if the video cables are connected to the VIDEO / S-VIDEO / Component port of the projector.
Remote Control Remote Control Batteries Installation 1. Remove the battery cover. 2. Load the batteries. Make sure the poles are correctly oriented. 3. Close the battery cover. Caution ►Avoid excessive heat and humidity. ►Do not drop the remote control. ►If the remote control will not be used for an extended period, remove the batteries. ►Do not expose the remote control to water or moisture. This could result in malfunction.
Remote Control (Optional) Remote Control POWER Power on / operation mode, Standby mode, Cool down mode. INPUT Select input source : RGB 1 RGB 2 HDMI S-Video Video Y,Pb,Pr MENU Display or hide the On-Screen Display main menu page. Press or menu item. to select On-Screen Display Press or to select and adjust the function of On-Screen Display menu item or value. LASER Aim the remote control at the screen, press and hold button to activate the laser pointer. MUTE Mute audio.
Menu Operation How To Operate On-Screen Display 1. Press "Menu" button. Following menu will appear. 2. Press up / down / left / right button on touch keypad or remote control to select item or adjust value.
MENU (PC Mode) MENU (PC Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjust the image sharpness. NATURAL Natural color. CINEMA Enhance contrast ratio when displaying DVD contents. DAYLIGHT Suitable when ambient light is strong.
MENU (PC Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjust the volume. OFF/ON Mute the volume OFF / ON.
MENU (PC Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description H POSITION 000/100 Move the image position horizontally. This function can be used under computer signal input only. V POSITION 000/100 Move the image position vertically. This function can be used under computer signal input only. PHASE 000/100 Adjust the image sharpness.
MENU (Video Mode) MENU (Video Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjust the image sharpness. COLOR 000/100 Adjust the strength of whole color.
MENU (Video Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjust the volume. OFF/ON Mute the volume OFF / ON.
MENU (Video Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection AUTO KEYSTONE OFF/ON Description Automatically Correct keystone distortion in image. V KEYSTONE -70/+70 Correct vertical keystone distortion in image manually. AUTO SEARCH OFF/ON Search signal source manually or automatically. OFF/ON Turn the Beep of Keypad OFF / ON.
MENU Advanced Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item ZOOM / PAN Selection Description EXECUTE Execute digital zoom and pan function. OFF/ON Freeze the current image on the screen. BLANK OFF/ON Hide the image. Display on the screen turns into black. BLANK POWER OFF 15/30/60 Minute Set power off time after "Blank". EXECUTE Reset all menu function to their factory default values.
MENU Advanced Menu LOGO SETTING This function allows you to customize the start-up logo. In order to access this page PIN code is required. Item Selection Description Select Mode( ► cursor button) LOGO MODE DEFAULT USER OFF The factory logo. The image you captured. The blank image. You can select color with background function. LOGO CAPTURE EXECUTE Start to capture the image.(PC mode only) BLACK BLUE WHITE Set background color.
MENU Advanced Menu Logo Capture How to use this function? Select Logo Capture item in the logo setting menu, then press ► button. Red frame will appear to select captures area. Image Use 4 direction buttons to adjust the position of the frame. Press "MENU" to start capturing and display a dialog. Logo Capture In Progress. NOTE ►You can capture an image only in computer mode. ►The area that can be captured is 512 x 384 dots.
MENU Presentation Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description AUTO CEILING OFF / ON Automatically invert the image when the projector is turned upside down, i.e. when the projector is mounted on the ceiling. FRONT EXECUTE Normal projection mode. CEILING EXECUTE Mirror the image vertically, only for the projector mounted upside down.
MENU Presentation Menu Reset Lamp Timer The lamp timer is the time counted after the last resetting. The usage time of the lamp is shown in the PRESENTATION Menu. Select the “RESET LAMP TIMER” if the lamp timer is required to reset. The dialog of “Reset Lamp Timer ?” is shown on the screen as below. To reset the lamp time, select “yes” of Lamp Reset and push the button on the top cabinet.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item PIN LOCK PROTECTION Selection OFF ON 1 ON 2 Description OFF: Turn off PIN lock protection. ON 1: After plugging in AC power, you need to key in PIN code at the first time of use. If the AC power stays unplugged, you do not need to key in PIN code next time when you use the projector. ON 2: You need to key in PIN code every time when you turn on the projector.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection FILTER TIMER RESET FILTER TIMER Description Show the filter use time. EXECUTE Reset the filter timer after cleaning / changing filter. 500 hours FILTER COUNTER 800 hours 1000 hours Select (500 / 800 / 1000 hours) depending on the environment.(default : 500 hours). Please see next page. MAC ADDR. For LAN control module, "MAC ADDR.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection PROJECTOR NAME Default is Projector DHCP OFF / ON IP Description Projector network setting display which shows bits that can be recognized by ASCII. When setting ON, projector's IP address will be assigned by DHCP server automatically. When setting OFF, you can use remote control to do setting manually. Key in IP address manually.
MENU Auto Filter Alert Auto Filter Alert in SECURITY category shows the air filter use time and alerts user to change filter. When the operating time reaches the set time, a warning message will appear on the screen to remind user of filter cleaning /replacing. Filter Replace... Filter has been used for more than 500 hours. NOTE ► Please reset the Filter time only when you replace the filter.
MENU PIN Key In Operation When the projector is turned on and the PIN LOCK PROTECTION is set to [ON], the image will show as on the right side. 1. Press the MENU button on the projector or remote control. Enter PIN code by keypad or remote control. 2. How to enter a PIN code? You can use control panel or remote control. TOUCH KEYPAD REMOTE CONTROL The touch keypad and remote control buttons to enter a sequence of PIN code is like the photo below.
Network Control Software Application Network Control Software Application LAN Procedure to utilize this function Network Control is provided in visual interface, it can help user to monitor and manage the projector(s) status in the local area network. 1. Register the projector(s) which needs to be controlled. " Auto search " can help you to seek the projector(s) source easily. After registering in the work group, you can start to control the projector. 2. Group the projector(s) into different sections.
Network Control Software Application Before Using Network Control Software 1. If the system is Windows 2000, XP or Vista, the PC should be started by the Administrator. 2. Before starting the Network Control software, please check the following. (2-1) The computer must have Network Control software installed. (2-2) The projector should be powered on and the LAN wire is well connected to projector. (2-3) The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
Network Control Software Application-Browser Control There are two ways to connect to the network control: Browser Control and Software control. Browser Control Auto IP address setting (DHCP setting is "ON"): (1) Enable DHCP from the projector on-screen-display menu, under "SECURITY \ LAN SETTING". ʻ˅ʼʳPlease wait for the PC server to release IP address to the projector. (3) Enter "Given IP address (For example http://192.168.1.
Network Control Software Application-Browser Control Item Setting description: ITEM SETTING Status Control Network Alert Schedule DESCRIPTION Show current projector status and network configuration settings. Select projector’s detailed setting from this page. Set up network configuration and password from this page. Show and setup Alert configurations. Show and set up Schedule, including Weekly Schedule and Specific Day.
Network Control Software Application-Browser Control Status : Show current projector status and network configuration settings. ITEM SETTING DESCRIPTION IP Address Show current IP address. System Status Show if projector is Power On or Inactive *. Projector Name Show projector name. Group Name Show group name. Lamp Hours Show lamp used hours on current projector. Filter Hours Show filter used hours on current projector. Input Source Show current input source. Date(y/m/d) Show date set on current projector.
Network Control Software Application-Browser Control Control: Select projector’s detailed setting from this page. ITEM SETTING Basic Projector Name System Status Power Switch Input Source Date Setting Time Setting Picture Brightness Contrast Sharpness Color Tint Display Mode Audio Volume Mute Setting V Keystone Auto Sync Auto Search Advanced Freeze Resize Reset Presentation Projection Lamp Mode DESCRIPTION Show projector name on the current projector. how if projector is Power On or Inactive .
Network Control Software Application-Browser Control Network : Set up network configuration and password from this page. ITEM SETTING Network DHCP IP Address Subnet Mask Gateway DNS Server Group Name Projector Name Password:ADMIN Administrator New Password Confirm Password Password:USER User New Password Confirm Password DESCRIPTION Assign an IP address to the projector from the DHCP server automatically. Set up IP Address when DHCP is disabled. Set up Subnet Mask when DHCP is disabled.
Network Control Software Application-Browser Control Alert: Show and setup Alert configurations. When problem occurs to the projector, it will automatically send e-mail to remind user. How to opearte: 1. Enter Email Setting columns. 2. Enter SMTP Setting columns. 3. Select Alert Condition. Multiple choices are fine. 4. Press Submit to confirm. 5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to see if the attendees can receive the e-mail.
Network Control Software Application-Browser Control Schedule : Show and set up Schedule, including Weekly Schedule and Specific Day. Weekly Schedule To power on and power off projector based on Weekly Schedule. How to set up: 1. Choose week days. 2. Set up power-on or power-off time. (Please be sure that the interval between power-on and off setting is more than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5.
Network Control Software Application-Software Control Software Control Activate Network Control Software Execute the Network Control Software. Monitor window below appears.
Network Control Software Application-Software Control Projector Auto Search. Click the (Projector search), then the Search Window below appears. NOTE If the security warning window appears, please select "Unblock" to allow the Network Control software to work. Click (search again), then the target projectors will be listed as follows. NOTE If there is no projector found on the display window, the following maybe the causes: 1. There is no DHCP server available on the LAN.
Network Control Software Application-Software Control Modify The Projector Setting If you need to modify the projector’s setting, please move mouse cursor to the table on the left and press button on the column. The contents of the setting will appear on the right side table. < Graph 5 > : Register Table. Note When DHCP setting is changed, in order to make the change effective AC power to the projector needs to be disconnected and reconnected.
Network Control Software Application-Software Control Sorting the projectors Projector can be sorted easily by clicking the monitor window title (Group Name) or (Projector Name). After registering, you can click click button (Data single capture) in the tool bar or button (Start Auto Scan) to update the status. NOTE While Auto Scan is running to update the status, the scroll bar for the window is grayed out and the hidden column can not be shown.
Network Control Software Application-Software Control Delete Select the registered projector in monitor window. Click mouse right key and select "Delete" to erase the registered projector data. < Graph 6 > : Register Table.
Network Control Software Application-Software Control Projector Setting (Setting for individual projector) Select the registered projector in monitor window. Click mouse right key and select "projector setting" to modify the registered projector data. After finishing the setting, button or cancel by clicking button. you can save by clicking < Graph 7 > : Register table. < Graph 8 > :Setting table.
Network Control Software Application-Software Control System Setting (Setting for all projectors) Click button (system setting) to modify system alert setting. Saving the setting < Graph 9 > Note: Alert setting in System Setting vs Projector Setting Whenever the " " Save button is pressed in System Setting, the value becomes effective for all the projectors registered. After this if the value in Projector Setting is changed and saved, the value becomes effective only for the projector.
Network Control Software Application-Software Control System Setting Monitor Item Description Lamp Timer Read lamp use time from projector. Air Filter Alert Read Air Filter Timer from projector. System Status/ Tempeture Level Read System Status and Temperature from projector in Power On status. Input Source Read Input Source Selection from projector in Power ON status. < Table 2 > Default Setting Item Description Lamp Timer Alert (Hr.) Default Setting Includes 1000/1500/2000/3000 Hours.
Network Control Software Application-Software Control Saving the Project File Save the Configuration above as Project File by clicking the save button in the Tool bar in the Monitor window before closing Network Control Software. If it is not saved, all the configuration above will be lost. From next time after starting this Network Control Software the configuration can be recovered easily by opening the Project File.
Network Control Software Application-Software Control Link(Controlling Projector) Select the registered projector in monitor window. Click mouse right key and select "Link" to show the control panel table and the projector connecting status.
Network Control Software Application-Software Control Power Control Icon Name Power on Power off Input Source Icon Name Video S-Video Y, Pb, Pr / Y, Cb, Cr HDMI RGB 1 Change Input Source Function Key Icon Name Icon Name Up Freeze Down Blank Left Keystone Correction + Right Keystone Correction - Menu Increase Brightness Auto Sync Decrease Brightness Mute Higher Contrast 57
Network Control Software Application-Software Control Function Key Icon Name Lower Contrast Zoom In Zoom Out Volume Up Volume Down Projector Status Icon Name System Status Input Source Status Lamp Timer Air Filter Timer 58
Network Control Software Application-Software Control Network Control Window introduction Icon Name Description Scan all Capture the all registered projectors’ information one time only. Start Auto Scan According to the system setting, get the projector information automatically. Stop Auto Capture Stop scanning the projector information. Auto Search Search the projector in the same network to register and modify the setting. Open Project File Open project file which was saved.
Maintenance of Projector Filter When a warning message appears to remind you to clean the air filter, please replace a new one as soon as possible. Please check and clean the air filter periodically. How to clean or replace the filters Turn off the projector, and unplug the power cord. Wait to allow the projector to cool down sufficiently. 1. Push up the white stopper of the Filter cover and remove it from the side of projector as shown below. 2.
Maintenance of Projector Lamp Please turn off the projector and unplug the AC power cord. And then, let the projector cool down at least 60 minutes. Replacing New Lamp(Part Number:23040034) 1. Remove the lamp door. 2. Loosen 2 screws of the lamp holder. Hold the handle on the top of the lamp, pull out the lamp straight off the projector. 3. Insert new lamp, lock the lamp door firmly with 2 screws. 4. Put the lamp door on. 5. Please reset the lamp timer after replacing lamp. (P.
Maintenance of Projector WARNING The projector uses a high-pressure mercury lamp. The explosion of lamp with a loud bang or burn out could possibly cause injury or a fire. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing; and for gas containing mercury to escape from the projector’s vent holes. If the lamp has broken, do not check the inside of the projector. Please ventilate the room immediately.
Maintenance of Projector Additional -In order to ensure the safe use of your projector, please contact your dealer to inspect about once a year. -Before maintenance, make sure the power cable is unplugged, allow the projector to cool sufficiently. The high temperature state of the projector could cause a burn in and/ or malfunction to the projector. -Never try to maintain the inside of the projector by yourself.
Troubleshooting Indicator The power and lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved, contact your dealer. In normal status~~~ POWER LAMP CONDITIONS DESCRIPTION Off Stand by mode Projector is ready to be turned on. Off On mode Projector is on and operating. Lighting In Green Blinking In Red ( Slow ) Cool down mode Projector is in cool down mode and will not respond to user input.
Troubleshooting Error For Machine Defects The following problems may be confused with a machine defect. Check and follow the table. If it couldn’t be improved, contact your dealer. Symptom Cause / Remedy The power cord is disconnected. Plug the power cord into an AC outlet. Intending to turn on the projector again during the cool down mode. Wait until the cool down mode has completed. There is no lamp and/or lamp cover is not firmly closed.
Troubleshooting Error For Machine Defects Symptom No audio Remote control is not working Cause / Remedy The projector is not connected correctly. Check audio cable if connect correctly. The volume is set to minimum. Adjust the volume. Mute is turned on. Press the MUTE button. No battery. Before using the remote control, please check the battery of remote control. Remote signal is obstructed. Remove the obstacle between projector and remote control.
Troubleshooting List of Supported Monitor Displays Computer mode / HDMI table Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640x480 VESA 60 / 72 / 75 / 85 640x480 SVGA 56 / 60 / 72 / 75 /85 800x600 XGA 60 / 70 / 75 / 85 1024x768 SXGA 70 / 75 1152x864 SXGA 60 / 75 1280x960 SXGA 60 1280x1024 WXGA 60 / 75 1280x800 WXGA+ 60/ 75 / 85 1440x900 SXGA + 60 / 75 1400x1050 UXGA 60 1600x1200 WSXGA+ 60 1680x1050 MAC 67 1280x1024 / 640x480 MAC 75 832x624 MAC 75 1024x768
Appendix Technical Specifications Mechanical Information Projector Type Dimensions(WxHxD) Net Weight Feet Adjustment Short-Throw Interactive Projector 360 x 348 x 132 mm 4.1 kg up to 7° Panel Resolution LCD Panel System Panel Resolution Number of Pixels 0.59" TFT LCD Panel, 3 panels 1,280 x 800 dots 3,072,000 (1,280 x 800 x 3 panels) Signal Compatibility Color System SD/HD TV Signal Input Scanning Frequency PAL,SECAM,NTSC 480i, 480p, 575i, 575p, 720p, 1080i and 1080p H-sync. 31~92kHz, V-sync.
Appendix Appendix Menu Tree (PC Mode) Brightness PICTURE Contrast Sharpness Display Mode AUDIO Volume Mute Natural Cinema Daylight Green Board White Board Black Board User PRESENTATION Reset Lamp Timer V Position Power Management Phase Frequency PIN Lock Protection Auto Keystone Off On 1 On 2 Modify PIN V Keystone Auto Sync Lamp Mode Front Ceiling Rear Ceiling And Rear Lamp H Position SETTING Auto Ceiling SECURITY Filter Timer Auto Search Reset Filter Timer Zoom / Pan Filter Counte
Appendix Menu Tree (Video Mode) Brightness PICTURE Contrast Auto Ceiling Sharpness PRESENTATION Color AUDIO Volume Mute Natural Cinema Daylight Green Board White Board Black Board User Reset Lamp Timer Power Management PIN Lock Protection Off On 1 On 2 Modify PIN SECURITY SETTING Lamp Mode Lamp Tint Display Mode Front Ceiling Rear Ceiling And Rear Filter Timer Auto Keystone Reset Filter Timer Auto Sync Filter Counter Auto Search 500 hours 800 hours 1000 hours MAC ADDR.
Appendix Appearance Screw for Ceiling Mounted M4x8mm 4pcs
Appendix Configurations of Terminal Analog RGB Input/Output (1) Connections(15P HD-Sub) ˈ ˇ ˄˃ ˄ˈ ˆ ˌ ˄ˇ ˅ ˋ ˄ˆ ˄ ˊ ˄˅ ˉ ˄˄ (2) Pin Number Define Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Name R signal Input G signal Input B signal Input N.C. GND R return(GND) G return(GND) B return(GND) N.C. N.C. Signal return(GND) DDC data HSYNC/TTL/Comp.
Appendix HDMI (1) Connections 1 3 2 5 4 7 6 9 11 13 15 17 19 8 10 12 14 16 18 (2) Pin Number Define Pin Signal Name NO. 1 TMDS Data 2+ 2 Ground(TMDS Data 2) 3 TMDS Data 24 5 6 7 8 Pin Signal Name NO. 9 TMDS Data 010 TMDS Clock + 11 Ground(TMDS Clock) TMDS Data 1+ 12 TMDS Clock Ground(TMDS Data 13 TMDS Data3+ 1) TMDS Data 114 5V Power TMDS Data 0+ 15 SCL Ground(TMDS Data 16 SDA 0) Pin NO.
Appendix Component(Y,Pb,Pr/Y,Cb,Cr) (1) Connections Y/Y Pb /Cb Pr / Cr (2) Pin Number Define P2 P1 Y Pin NO.
Appendix Composite Video Signal (1) Connections L Video R (2) Pin Number Define Pin2 Pin1 Pin NO. 1 2 Signal Name Video Signal(GND) Video Input Connection GND V (3) Connector:RCA jack (4) Input signal polarity: Composite signal, Sync:Negative (5) Input level:Video signal: 1.0V ±0.
Appendix S-Video Signal (1) S-Video Connections and Connector (2) Pin Number Define Pin NO. 1 2 3 4 Signal Name Y Signal(GND) C Signal(GND) Y Signal Input C Signal Input (3) Input signal polarity ●Composite signal sync: Negative (4)Input level ●Y Signal:1.0V ±0.2V p-p 75Ω terminate, NRZ ●Sync:0.286V ±0.1V p-p ●Chromatic:75Ω terminate, NRZ ●Burst:0.
Appendix RS232 Control Communication Protocol Items Standard Baud rate Data length Parity Stop bit Flow Control Specification 9600 bps 8 bits None 1 bit None RS232 Cable Define PC Side RX 2 TX 3 GND 5 Projector side with D-Sub Pin RX 3 TX 2 GND 5 USB Connector 4 5 2 3 Pin NO.
U.S.A. Canada EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel: 800-242-3454 (949)-457-0200 Fax: 800-457-3454 (949)-457-7878 E-Mail: usa@eiki.com EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel: 800-563-3454 (705)-527-4084 Fax: 800-567-4069 (705)-527-4087 E-Mail: canada@eiki.
