Owner`s manual
Table Of Contents
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation
- EIKI EIP-UHS100+XHS100 UM_20141027 - P1~50.pdf
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation
66
Advance Control
This page allows you to select color temperature or adjust black balance or white
balance. Click the option to select Color Temp. or arrow button to adjust the setting.
Conguration
Use this page to modify the networking setting such as IP address, Subnet, Gateway
and DHCP. Make sure the IP address of the projector and PC are in the same network
group. For example, 192.168.0.X. Whereas X must contain a different value.
If the network provides DHCP service, you can enable DHCP client. IP Address,
Subnet, and Gateway will be assigned by DHCP service. Please contact with your network
administration for more details.