Owner`s manual
Table Of Contents
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation
- EIKI EIP-UHS100+XHS100 UM_20141027 - P1~50.pdf
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation

53
Maintenance and Care
Change Filters
The interval of the filter replacement is affected by the dustiness. Check the filters
periodically for better performance.
Note:
Dirtyltermayreducetheairowingintotheprojectorandthetemperatureintheprojectormayriseasa
result. This may activate the protection mechanism or damage the components.
• Check, clean and replace the lter periodically.
To replace the lter on the left side of the projector
1. Loosen the two screws on the lter cover and remove the lter from it.
2. Place a new lter and install the lter cover. Tighten the two screws on the lter cover.