Owner`s manual

50
Model
The designated model number of the projector.
Serial Number
The designated serial number of the projector.
Software Version
The version of software installed on the projector.
Active/PIP Source
Displays the current Active/PIP sources.
Pixel Clock
Displays the pixel clock of the current input signal.
Signal Format
Displays the format of the current input signal.
H/V Refresh Rate
Displays the horizontal and vertical refresh rates for the current image.
Lamp 1 Time
Display the lamp 1 usage time. When you change the new lamp.
Lamp 2 Time
Display the lamp 2 usage time. When you change the new lamp.
Power On Time
Display the total On time for the projector.
Blue Only
This function displays only blue color to facilitate the process of image inspection for a
service personnel.
Factory Reset
Restore the configurations in the OSD Menu back to the factory default. Note that this
function will not apply to items including no signal, network, Projector control, startup Logo,
language, High Altitude mode and lamp hours.
Note:
WhenFactoryResetisexecuted,allsourcememoriescreatedbytheprojector(i.e.timingsfiles)willbe
erased.