Owner`s manual
Table Of Contents
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation
- EIKI EIP-UHS100+XHS100 UM_20141027 - P1~50.pdf
- Feature and Design
- Overview
- Projector contents
- Terminals and Connectors
- Control Keys and Indicators
- Installation
- Lens replacement
- Positioning Projector
- Lens Shift Adjustment
- Connecting to Computer
- Connecting to Video Equipment
- Trigger connection
- RS-232 Connection
- LAN Connection
- Connecting to wired remote controller
- Connecting the AC Power Cord
- Basic Operation
44
OSD Introduction - ALIGNMENT
Projection Mode
Use◄ or ►function to select the projection mode (Front, Rear, Ceiling + Front, Ceiling +
Rear).
Fan Mode
Use◄ or ► to set the fan mode to Normal, Up or Down.
Normal: Normal fan speed.
Up : Increase the fan speed.
Down : Decrease the fan speed.
Lens Control
Use this function to display Lens Control window, press ◄, ►, ▲ or ▼ to adjust lens
shift, Zoom or Focus. Press Enter button to switch window for Zoom & Focus adjustment
or Lens Shift adjustment.
Lens Memory
Load Memory: Select this item to load the lens settings.
Save setting: You can save the lens settings.
Clear Memory: Select this item to clear the lens settings.