Owner`s manual

21
Positioning Projector
Picture Level and Pitch Adjustment
The projection angle is adjustable up to 5 degrees upward and downward respectively
by rotating front and rear. To raise the projector, rotate the front feet clockwise, rotate the
rear foot clockwise to lower the projector.
Adjusting the Picture Orientation
This projector is designed to be installed in one of four possible installation locations.
Take into consideration the size and position of the screen, the location of a suitable
power outlet, rest of equipment. Open the Menu -> ALIGNMENT -> Projection Mode to the
preferred projection setting.
Front :
Select this location with the projector
placed in front of the screen. This is the
most common way to position the projector.
Ceiling + Front :
Select this location with the projector
mounted on the ceiling in front of the
screen. Ceiling mount kit is required. Please
consult your dealer for more details.
Rear :
Select this location with the projector
placed behind the screen. Note that a
special rear projection screen is required.
Ceiling + Rear :
Select this location with the projector
mounted on the ceiling behind the screen.
Note that Ceiling mount kit and special rear
projection screen are required.
Note:
Ceilinginstallationmustbedonebyaqualiedprofessional,Itisnotrecommendedyouinstalltheprojector
yourself. For more information, please contact your dealer.
Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is
dropped.
Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered.