Owner's Manual
Table Of Contents
- Introduction
- Quick Start
- Setup
- Connections
- Basic Operation
- Useful Features
- Operating with the Remote Control
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Adjusting the Projected Image (“SCR - ADJ” Menu)
- Adjusting the Projector Function (“PRJ - ADJ” Menu)
- Auto Sync (Auto Sync Adjustment)
- Auto Power Off Function
- Auto Restart Function
- STANDBY Mode
- Setting the Confirmation Sound (System Sound)
- Audio Output Type Setting
- Speaker Setting
- Audio Input
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- System Lock Function
- Checking the Lamp Life Status
- Keylock Function
- Setting up the Projector Network Environment (“Network” menu)
- Troubleshooting with the “Help” Menu
- Appendix
18
Setting up the Projector
Video Setup
If using this projector outside the U.S.A., please change setting to “0 IRE” in Video Setup. (See
page 44.)
Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's
feet fl at and level. Doing so will eliminate the need for Keystone correction and provide the best
image quality. (See page 28.)
Standard Setup (Front Projection)
Place the projector at the required distance from the screen
according to the desired picture size. (See page 20.)
Example of standard setup
Side View
Screen
Lens center
H
L
Refer to page 20 for additional information concerning “Screen Size and Projection Distance”.•
Note
■
Ceiling-mount Setup
It is recommended that you use the
optional EIKI ceiling-mount adaptor and
unit for this installation. Before mounting
the projector, contact your nearest EIKI
Authorized Dealer or Service Center to
obtain the recommended ceiling-mount
adaptor and unit (sold separately).
■