Service manual

20
EIP-3500
8. Removing the peripheral units
8-1. Remove 4 fixing screws for the front adjuster unit.
8-2. Remove 8 bracket fixing screws and remove the bracket A, bracket B and earth plate.
8-1
Bracket A
Bracket B
Front Adjuster Unit
8-2
Earth Plate
Front Adjuster Unit
Please move "Bracket A" to the bottom of
"Earth Plate". (See page 21.)
7. Removing the ballast/power supply unit
7-1. Remove the fixing screw for the rear R/C PWB unit.
7-2. Remove 4 fixing screws, 4 WH bosses and the edge saddle for the ballast unit.
7-3. Remove 11 fixing screws and 5 WH bosses for the power supply unit.
7-4. Remove 4 fixing screws from the exhaust fans and fan guard.
7-1
7-2
7-2
7-4
7-3
7-3
7-3
7-3
7-3
7-3
7-3
7-2
Power Supply Unit
Exhaust fans
Fan guard
Ballast Unit
Rear R/C PWB Unit
Power Supply PWB Unit
Edge saddle