Introduction Quick Start ® EIP-2600 EIP-250 Setup Connections EIP-2600 EIKI INDUSTRIAL CO., LTD.
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of “Supplied accessories” on page 10. Model No.: Serial No.: SPECIAL NOTE FOR USERS IN THE U.K.
Before using the projector, please read this owner’s manual carefully. Introduction ENGLISH 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. 2.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY For EIP-2600 INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
How to Read this Owner’s Manual ■ The specifications are slightly different, depending on the model. However, you can connect and operate all models in the same manner. • In this owner’s manual, the illustration and the screen display are simplified for explanation, and may differ slightly from the actual display. The examples used throughout this manual are based on the EIP-2600 model.
Contents Preparing Introduction Useful Features How to Read this Owner’s Manual ....... 3 Contents ............................................... 4 IMPORTANT SAFEGUARDS ............... 6 How to Access the PDF Owner’s Manuals .............................................. 9 Accessories ........................................ 10 Part Names and Functions ................. 11 Operating with the Remote Control .... 32 Projector ............................................... 11 Rear View ..................
Troubleshooting with the “Help” Menu ...................................... 48 Utilizing the “Help” Menu Functions .... 48 Reference Appendix Maintenance ....................................... 49 Maintenance Indicators ...................... 50 Regarding the Lamp ........................... 52 Lamp ..................................................... 52 Caution Concerning the Lamp ............ 52 Replacing the Lamp ............................. 52 Removing and Installing the Lamp Unit ...................
IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic rules for its installation, use and servicing. 1.
18. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions.
Observe the following safeguards when setting up your projector. Caution concerning the lamp unit ■ Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest EIKI Author ized Dealer or Service Center for replacement. See “Regarding the Lamp” on page 52. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality, EIKI recommends that this projector be installed in an area free from humidity, dust and cigarette smoke.
Caution regarding usage of the projector Using the projector in other countries ■ If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it. ■ If the power cord is unplugged while the cooling fan is running, some parts of the projector may still be hot. Use caution when handling the projector. ■ Do not carry the projector by holding the lens.
Accessories Supplied accessories Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) RGB cable (10' (3.0 m)) Lens cap (attached) DIN-D-sub RS-232C adaptor (5 57/64" (15 cm)) Remote control for EIP-2600 for EIP-250 Power cord* (1) 3 RCA to mini D-sub 15 pin cable (10' (3.0 m)) (2) For U.S. and Canada, etc. (6' (1.8 m)) For Europe, except U.K. (6' (1.
Part Names and Functions Numbers in Z refer to the main pages in this owner’s manual where the topic is explained. Projector Top View Power indicator 25, 50 STANDBY/ON button For turning the power on and putting the projector into standby mode. 25 ENTER button For setting items selected or adjusted on the menu. 38 25, 50 50 Temperature warning indicator 32 ECO+QUIET button For lowering the noise of the cooling fan and extending the lamp life.
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this owner’s manual where the topic is explained. Rear View Terminals *AUDIO 1 input terminal 23 COMPUTER/ 21 COMPONENT input 22 terminal Terminal for computer RGB and component signals. 22 S-VIDEO input terminal Terminal for connecting video equipment with an S-video terminal. 24 *DVI-I input 21 terminal 22 Terminal for DVI digital, computer RGB and component signals.
STANDBY button 25 For putting the projector into the standby mode. 25 ON button 29 COMPUTER, *DVI, S-VIDEO, VIDEO buttons For switching to the respective input modes. 33 FREEZE button BREAK TIMER button 32 For displaying the break time. MAGNIFY buttons 33 For enlarging/reducing part of the image. PAGE UP/PAGE 34 DOWN buttons Same as the [Page Down] and [Page Up] keys on a computer keyboard, when with the USB connection (using a USB cable or the optional remote receiver).
Part Names and Functions (Continued) Inserting the Batteries 1 Pull down the tab on the cover and remove the cover towards the direction of the arrow. 2 Insert the batteries. 3 Insert the lower tab of the cover into the opening, and lower the cover until it clicks in place. • Insert the batteries making sure the polarities correctly match the m and n marks inside the battery compartment. Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Remote control sensor Usable Range The remote control can be used to control the projector within the ranges shown in the illustration. Note • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ depending on the screen material. 30° When using the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp.
Quick Start This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example.
4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When “Setup Guide” is set to “On”. See page 44.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup Guide. _PP. 26, 27 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the projector Shrinks upper side.
Setting up the Projector Setting up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality. (See page 28.) Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 20.
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ mode in “SCR-ADJ” menu. See page 44.
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ ] Width Projection distance [L] Height Minimum [L1] Maximum [L2] 300 (762 cm) 610 cm (240 ) 457 cm (180 ) 11.2 m (36 10 ) Distance from the lens center to the bottom of the image [H] 19 cm (7 9/16 ) — 250 (635 cm) 508 cm (200 ) 381 cm (150 ) 9.4 m (30 9 ) 10.8 m (35 5 ) 16 cm (6 19/64 ) 200 (508 cm) 406 cm (160 ) 305 cm (120 ) 7.5 m (24 7 ) 8.
Connecting the Projector to Other Equipment Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the equipment to be connected. After making all connections, turn on the projector and then the other pieces of equipment. When connecting a computer, ensure that it is the last equipment to be turned on after all the connections are made.
Connecting the Projector to Other Equipment (Continued) Equipment Video equipment Terminal on Cable connected equipment HDMI to DVI cable HDMI (commercially available) output terminal DVI digital output terminal Terminal on the projector DVI-I DVI Digital cable (commercially available) 3 RCA to mini D-sub 15 pin cable (supplied) COMPUTER/ COMPONENT S-video output terminal S-video cable (commercially available) S-VIDEO Video output terminal Video cable (commercially available) VIDEO Cables for
Equipment Audio equipment Terminal on connected equipment Cable ø3.5 mm stereo or mono audio cable ø3.5 mm audio output (commercially available) terminal RCA audio output terminal RCA audio cable (commercially available) Terminal on the projector AUDIO 1 AUDIO 2 (EIP-2600) AUDIO (EIP-250) Cables for a camera or a video game Audio output terminal Monitor Amplifier RGB input terminal RGB cable (supplied or commercially available) ø3.5 mm audio input terminal ø3.
Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS232C adaptor and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 57 for details.
Turning the Projector On/Off Info Turning the Projector on Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 21 to 24.) Remove the lens cap and press STANDBY/ON on the projector or ON on the remote control.
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically highlights the items in the following order: 1 FOCUS 4 ENTER 2 HEIGHT ADJUST 3 ZOOM However, you can adjust the focus, height (angle), or zoom regardless of the highlighted item.
3 Adjusting the Height The height of the projector can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from the HEIGHT ADJUST lever of the projector after its height has been finely adjusted.
Image Projection (Continued) Correcting Trapezoidal Distortion Adjustment buttons (P/R/O/Q) When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.
COMPUTER, DVI (EIP-2600 only), S-VIDEO, VIDEO buttons Switching the Input Mode Select the appropriate input mode for the connected equipment. AV MUTE button Press COMPUTER, DVI (EIP-2600 only), S-VIDEO or VIDEO on the remote control to select the input mode. VOL +/– (Volume) buttons • When you press INPUT on the projector or DVI on the remote control (EIP-2600 only), the INPUT list appears. Press P/R to switch the INPUT mode.
Image Projection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Press RESIZE. RESIZE button • See page 43 for setting on menu screen.
VIDEO VIDEO/DTV Input signal Video/DTV For 4:3 screen Image type NORMAL AREA ZOOM For 16:9 screen V-STRETCH BORDER STRETCH 1 * *1 *1 *1 *1 *1 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Squeeze Letter box 720P, 1035I, 1080I, 1080P 16:9 aspect ratio *1 *2 *2 16:9 aspect ratio 540P *1 (4:3 aspect ratio in 16:9) : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals *1 The Image Shift function can be used for the
Operating with the Remote Control BREAK TIMER button FREEZE button MAGNIFY buttons Displaying the Pointer POINTER button Press POINTER and press P/R/ O/Q on the remote control to move the pointer. SPOT button • Press EFFECT to change the pointer icon (5 types). Adjustment buttons (P/R/O/Q) EFFECT button PICTURE MODE button ECO+QUIET button 1 Star 2 Finger1 Finger2 Heart Underline Press POINTER again. • The pointer will disappear.
Auto Sync (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Graphs, tables and other portions of projected images can be enlarged. This is helpful when providing more detailed explanations. 1 Note Press control. MAGNIFY on the remote • Enlarges the image. • Pressing or MAGNIFY enlarges or reduces the projected image.
Operating with the Remote Control (Continued) Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse. Connecting with a USB cable Computer To USB terminal To USB terminal USB cable (commercially available) The mouse pointer can be operated in the following way after it is connected.
Menu Items The following shows the items that can be set in the projector. Main menu “Picture” menu Picture Page 40 PAGE 1 Picture SCR - ADJ Picture Mode Contrast Bright Color Tint Sharp Red Blue PRJ - ADJ Sub menu Standard Presentation Movie Game sRGB*1 Picture Mode Page 40 Help Standard 0 0 0 0 0 0 0 Contrast -30 +30 Bright -30 +30 Color -30 +30 *2 Tint -30 +30 *2 Sharp -30 +30 *2 Red -30 +30 Blue -30 +30 Page 41 SEL./ADJ.
Menu Items (Continued) “Screen adjustment (SCR-ADJ)” menu Picture SCR - ADJ Resize Image Shift Keystone PRJ - ADJ Help Main menu SCR - ADJ Normal Page 43 0 0 Normal Full Dot By Dot Area Zoom V-Stretch Border Stretch Page 43 Image Shift -96 +96 *3 -75 +75 *4 On CC1 Logo On Front English OSD Display Closed Caption Background Setup Guide PRJ Mode Language Sub menu Resize Page 43 COMPUTER/ DTV Keystone -80 -40 Normal Area Zoom V-Stretch Border Stretch +80 *3 +40 *4 Page 43 OSD Display [On/Off
The items you can set with the “Help” menu “Help” menu Picture SCR - ADJ PRJ - ADJ Help “Help” menu n Page 48 There is no picture or audio Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL SEL.
Using the Menu Screen ENTER button Adjustment buttons (P/R/O/Q) MENU/HELP button ENTER button Adjustment buttons (P/R/O/Q) RETURN button • Press RETURN to return to the previous screen when the menu is displayed. MENU/HELP button Menu Selections (Adjustments) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. 2 Press Q or O and select “Picture” to adjust. • The “Picture” menu screen for the selected input mode is displayed.
3 Press P or R and select “Bright” to adjust. • The selected item is highlighted. Picture SCR - ADJ Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColor TM C.M.S. Setting C.M.S. DNR Lamp Setting Reset SEL./ADJ. PRJ - ADJ Help Standard 0 0 0 0 0 1 On Off Bright Single ADJ END Items to be adjusted Picture To adjust the projected image while watching it SCR - ADJ Resize Image Shift Keystone PRJ - ADJ Help Border 0 0 Press ENTER. • The selected item (e.g.
Picture Adjustment (“Picture” Menu) Menu operation n Page 38 Q PAGE1 Q PAGE2 Picture 1 2 SCR - ADJ Picture Mode Contrast Bright Color Tint Sharp Red Blue SEL./ADJ. PRJ - ADJ Help Picture Standard 0 0 0 0 0 0 0 ENTER SCR - ADJ PRJ - ADJ Picture Mode 3 2 4 5 6 7 END Help Standard CLR Temp BrilliantColor TM C.M.S. Setting C.M.S. Progressive DNR Lamp Setting Reset SEL./ADJ.
Menu operation n Page 38 2 Adjusting the Image Adjustment items Contrast O button Q button For less contrast. For less Bright brightness. For less color Color*1 intensity. 1 For making skin Tint* tones purplish. For less Sharp*1 sharpness. Red*2 For weaker red. Blue*2 For weaker blue. BrilliantColor™*2 *3 For making the (EIP-2600) effect weaker. Bright Boost*2 (EIP-250) For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness.
Picture Adjustment (“Picture” Menu) (Continued) Menu operation n Page 38 5 Progressive Selectable items Description Useful to display fast-moving images 2D Progressive such as sports. Useful to display relatively slow3D Progressive moving images such as drama and documentary more clearly. Film Mode Reproduces the image of film source* clearly.
Adjusting the Projected Image (“SCR - ADJ” Menu) Menu operation n Page 38 Picture 1 2 3 Resize Image Shift Keystone 4 5 6 7 8 9 OSD Display Closed Caption Background Setup Guide PRJ Mode Language SCR - ADJ SEL./ADJ. 1 Setting the Resize Mode Note • For details of the Resize mode, see pages 30 and 31. • You can also press RESIZE on the remote control to set the resize mode. (See page 30.
Adjusting the Projected Image (“SCR - ADJ” Menu) (Continued) Menu operation n Page 38 5 Closed Caption 7 Selecting the Setup Guide Selectable items On Info • This function is available for NTSC3.58 and 480I signals. • This function does not work when the resize mode is set to “Border”.
Adjusting the Projector Function (“PRJ - ADJ” Menu) Menu operation n Page 38 Picture 1 2 3 4 5 6 7 8 9 0 SCR - ADJ Auto Sync Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock Lamp Timer(Life) SEL./ADJ. PRJ - ADJ 0 h Help On On On Standard On On Audio 1 9600bps Normal Disable 0 min 100% ENTER Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer.
Adjusting the Projector Function (“PRJ - ADJ” Menu) (Continued) Menu operation n Page 38 a Setting/Changing the keycode 7 Audio Input (EIP-2600 only) 6 Monitor Output This function allows you to select an appropriate combination of audio input terminals for each input mode. Selectable items Description Audio 1 The AUDIO 1 input terminal is used as an audio input terminal. Audio 2 The AUDIO 2 input terminal is used as an audio input terminal. 1 Select “System Lock”, then press ENTER or Q.
5 Enter the same keycode in “Reconfirm”. Keylock Function Locking the Operation Buttons on the Projector Note To cancel the keycode that you have already set • Press R on the projector for four times in steps 4 and 5 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection.
Troubleshooting with the “Help” Menu This function advises you to solve the problems during usage. Utilizing the “Help” Menu Functions ENTER button Adjustment buttons (P/R/O/Q) Example: When image flickering appears Operation to solve image flickering when projecting the computer RGB signal. 1 Press MENU/HELP. 2 Press O or Q to select “Help”, then press ENTER. 3 Press P or R to select “Vertical stripes or flickering image appears” on Help menu, then press ENTER.
Maintenance Cleaning the projector ■ Ensure that you have unplugged the power cord before cleaning the projector. ■ The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. ■ Do not use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of the agents in the plastic may cause damage to the quality or finish of the projector.
Maintenance Indicators ■ The warning lights (power indicator, lamp indicator and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the procedures given below.
Maintenance indicator Temperature warning indicator Lamp indicator Power indicator Normal Abnormal Off Red on (Standby) Red on Problem The internal temperature is abnormally high. Cause • Blocked air intake • Relocate the projector to an area with proper ventilation. (See page 8.) • Cooling fan breakdown • Internal circuit failure • Clogged air intake • Take the projector to your nearest EIKI Authorized Dealer or Service Center for repair. The lamp does not illuminate.
Regarding the Lamp Lamp ■ It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life (percentage) can be checked with the on-screen display. (See page 47.) ■ Purchase a replacement lamp of type AH-62101 from your place of purchase, nearest EIKI Authorized Dealer or Service Center. Hg LAMP CONTAINS MERCURY For State Lamp Disposal Information U.S.A. ONLY www.
Removing and Installing the Lamp Unit Warning! • Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury. Info Lamp unit AH-62101 Optional accessory STANDBY/ON button • Do not touch the glass surface of the lamp unit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.
Regarding the Lamp (Continued) 4 Remove the lamp unit. 5 Insert the new lamp unit. 6 • Loosen the securing screws from the lamp unit. Hold the lamp unit and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it. • Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws. Securing screws Replace the lamp unit cover. • Align the tab on the lamp unit cover (1) and place it while pressing the tab (2) to close it.
Connecting Pin Assignments COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals : mini Dsub 15 pin female connector 11 1 6 15 5 10 COMPUTER Input/Output Pin No. Signal 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. Not connected 10. GND 11. Not connected 12. Bi-directional data 13. Horizontal sync signal: TTL level 14. Vertical sync signal: TTL level 15.
Connecting Pin Assignments (Continued) RS-232C Terminal : mini DIN 9 pin female connector 8 9 7 3 6 Pin No. 1. 2. 3. 4. 5. 6. 7. 8. 9.
RS-232C Specifications and Commands Computer control A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type, commercially available) to the projector. (See page 24 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
RS-232C Specifications and Commands (Continued) Commands Example: When turning on the projector, make the following setting.
RETURN CONTROL CONTENTS S-Video Resize Video ALL Reset Computer INPUT Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp BrilliantColorTM (EIP-2600) Bright Boost (EIP-250) Progressive DNR Picture Reset Signal Type Audio Input DVI INPUT Picture Mode Normal Stretch Border Area Zoom V-Stretch Normal Stretch Border Area Zoom V-Stretch Standard Presentation Movie Game sRGB -30 – +30 -30 – +30 -30 – +30 -30 – +30 -30 – +30 -30 – +30 -30 – +30 -1 – +1 0 – +2 2D Progressive 3D Progressive Fi
RS-232C Specifications and Commands (Continued) RETURN CONTROL CONTENTS S-Video INPUT Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp BrilliantColorTM (EIP-2600) Bright Boost (EIP-250) Progressive DNR Picture Reset Audio Input Video INPUT C.M.S. Setting C.M.S.
RETURN CONTROL CONTENTS Clock Phase H-position V-position Fine Sync Adjustment Reset Image Shift OSD Display Closed Caption Video System Background Lamp Setting Auto Sync Auto Power Off Auto Restart STANDBY Mode PRJ Mode Language -150 – +150 -30 – +30 -150 – +150 -60 – +60 -96 – +96 (XGA)/-75 – +75 (SVGA) On Off Off CC1 CC2 Auto PAL SECAM NTSC4.43 NTSC3.
Computer Compatibility Chart Computer • Multiple signal support Pixel Clock: 12-170 MHz Horizontal Frequency: 15-110 kHz, Sync signal: Compatible with TTL level • Compatible with sync on green signal Vertical Frequency: 45-85 Hz, The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards.
Troubleshooting Problem Check Projector power cord is not plugged into the wall outlet. Power to the external connected devices is off. The selected input mode is wrong. Cables are incorrectly connected to the projector. Remote control battery has run out. External output has not been set when connecting notebook computer. The lamp unit cover is not installed correctly.
Troubleshooting (Continued) Problem An unusual sound is occasionally heard from the cabinet. Maintenance indicator on the projector illuminates or blinks in red. The projector cannot be turned on or put into the standby mode using STANDBY/ON on the projector. Picture is green on COMPUTER (Component)/ *DVI (Component). Picture is pink (no green) on COMPUTER (RGB)/ *DVI (RGB). Picture is too bright and whitish. The cooling fan becomes noisy. The lamp does not light up even after the projector turns on.
Specifications Model Display devices Resolution Lens F number Zoom Focus Input terminals DVI-I (Compatible with HDCP) RGB/Component (mini D-sub 15 pin) S-Video (mini DIN 4 pin) Video (RCA) Audio (ø3.5 mm stereo minijack) Audio (RCA) Output terminals RGB/Component (mini D-sub 15 pin) Audio (ø3.
Dimensions 3 33/64 (89) 1 31/64 2 5/8 (66.35) (37.
Index 3 RCA to mini D-sub 15 pin cable .......................... 22 Accessories ............................................................. 10 AC socket ................................................................ 24 Adjustment buttons ................................................. 38 AREA ZOOM ........................................................... 31 Aspect ratio ............................................................. 30 Audio Input .....................................................
U.S.A. Canada EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : canada@eiki.
