Owner`s manual

Connecting Peripheral Equipment

Connecting external speakers

Be sure to use external speakers with an impedance

of 4

and a rated input of at least 15 W.

While pushing the tab, insert the tip of the cable.

Release the tab.

• Be sure to connect the + and - terminals and the left and

right speakers properly.

• Avoid short circuiting the + and - terminals.

• It is recommended that you use the optional EIKI speaker

unit (SP-EF5201/SP-EF4601) for external speakers.

Note

Connecting multiple monitors

You can connect multiple monitors by using the

RGB/COMPONENT input terminals (COMPUTER IN 1

or COMPUTER IN 2) and the RGB/COMPONENT

output terminals (MONITOR OUT).

• The length of the signal cables or surrounding environment

may affect the image quality.

• When connecting multiple monitors, the screen may not

display properly. In this case, turn off the power to all the

monitors connected and then turn the power on again.

• For details, refer to the “SETUP MANUAL”.

Note