Owner`s manual

13
How to Install the Monitor
56
Insert and tighten the screws into the 4 holes on
the rear of the monitor.
Insert the stand into the openings on the
underside of the monitor.
• To detach the stand, perform the steps in reverse order.
• Store the protective covers. You will need them after detaching the stand.
Note
Mounting the monitor on the wall

Handling and precautions with the wall-mounted monitor
• You can mount the monitor on the wall using the optional WB-EF5201 bracket.
• For details, refer to the instructions supplied with the optional WB-EF5201 bracket.
Caution
• This monitor should be mounted on the wall only with the WB-EF5201 (EIKI) wall-mount bracket. The use
of other wall-mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the monitor requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. EIKI bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an EIKI recommended bracket to mount the monitor
• You can ask a qualifi ed service professional about using an EIKI recommended WB-EF5201 bracket to
mount the monitor to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
WB-EF5201 wall-mount bracket. (See the bracket instructions for details.)
WB-EF5201
Vertical mounting Angular mounting
About setting the monitor angle
• The center of the display
EFD-52:
The “f” position is at the center
of the display.
EFD-46:
The “b” position is at the center
of the display.
• Refer to the owner’s manual of
WB-EF5201 for details.
0°/5°/10°/15°/20°