Specifications

IMPORTANT SAFEGUARDS
WHEN USING THIS EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD AL-
WAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1. READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING EQUIP-
MENT.
2. DO NOT OPERATE EQUIPMENT WITH A DAMAGED CORD OR, IF THE
EQUIPMENT HAS BEEN DROPPED OR DAMAGED-UNTIL IT HAS BEEN
EXAMINED BY A QUALIFIED SERVICEMAN.
3. IF AN EXTENSION CORD IS NECESSARY CARE SHOULD BE TAKEN TO
ARRANGE THE CORD SO THAT IT WILL NOT BE TRIPPED OVER OR
PULLED.
4. ALWAYS UNPLUG EQUIPMENT FROM ELECTRICAL OUTLET WHEN NOT IN
USE. NEVER YANK CORD TO PULL PLUG FROM OUTLET. GRASP PLUG
AND PULL TO DISCONNECT.
5. TO PROTECT AGAINST ELECTRICAL SHOCK HAZARDS, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN, MOISTURE, OR OTHER LIQUIDS.
6. TO AVOID ELECTRIC SHOCK HAZARD, DO NOT DISASSEMBLE THIS
EQUIPMENT, BUT TAKE IT TO A QUALIFIED SERVICEMAN WHEN SOME
SERVICE OR REPAIR WORK IS REQUIRED. INCORRECT REASSEMBLY
CAN CAUSE ELECTRIC SHOCK HAZARD WHEN THE EQUIPMENT IS USED
SUBSEQUENTLY.
SAVE THESE INSTRUCTIONS
CAUTION: TO REDUCE THE RISK
OF ELECTRICSHOCK,DO NOT REMOVE
COVER(ORBACK).NOUSER.SERVICEABLE
1-
PARTS INSIDE. REFER SERVICING TO ~
QUALIFIED SERVICE PERSONNEL. .
CLASS 1 LASER PRODUCT
Product complies with DHHS rules 21
CFRsubchapterJ part 1040: 10atdate
of manufacture.
The lightningflash with arrowheadsymbol,within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated "danger-
ous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres.
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the appliance.
CLASS 1
LASER PRODUCT
DANGER-invisible laser radiation when open and interlockfailed or defeated.
Avoid direct exposure to the beam.
CAUTION- useofallcontrols, adjustmentsor performance of proceduresother
than those specified herein may result in hazardous radiation exposure.
Dew Formation
Window frames inside a warm room during winter will rapidly accumulate dew on the surface. This unit features
a precision lens element. This lens element is also subject to dew formation under the following circumstances:
~ When subject to sudden changes in temperature.
~ When the room in which the unit is placed subject to high humidity.
~ When moving the unit suddenly from a cold to a warm place.
This unit will not be ableto correctly readthe programs underthese circumstances,and the player will not operate
properly. In such cases, after turning the power switch on, wait for 20 to 30 minutes before operating the unit.
I
2
Important Notice:
Do not discard shiooina carton and
oackina materials.
These items may be needed for stor-
age or future servicing. Before trans-
porting make sure CD Compartment
Lid is closed tight.