Specifications

HOW TO RECORD WITH EXTERNAL MICROPHONE
-
1. Connect an external microphone.
2. Set Function Selector to Tape mode.
3. Push Stop/Eject button to open Cassette Compartment.
4. Insert a blank cassette into the slides of the Compartmentdoor with side to
be used facing out and tape facing up. Close the Compartment door.
5. Push Pause button to delay the start of recording.
6. Push Record button.
7.
8.
Push Pause button to release and to begin recording.
Speak, sing, or play music directly in front of the microphone.
If you are using a remote control microphone to pause during recording,
movemicrophoneswitch to "off",thenbackto "on"when youwishto resume.
9. To stop recording, push Pause or Stop/Eject button. To rewind the tape,
push Review button.
NOTE: The external microphone does not record in stereo. When the end of
the tape is reached, Play and Record buttons will be automatically released.
2
-
r
- _-
To record from auxiliary source:
To record from sound sources such as a radio, tape player or other device
through the AUX input jack, obtain a suitable connecting cord to hook-up the
source with the AUX jack.
Followthe recording procedures inthe "HOWTO RECORDWITH EXTERNAL
MICROPHONE".
Using the unit as a public-address system
This unit can be used to make amplified announcements.
1. Connect an external microphone to the "MIC" jack.
2. Set Function Selector to CD mode.
3. Insert a CD.
4. Insert a blank tape.
5. Push Record button.
The CD player will automatically start in a few seconds.
Recording will also start. If recording is not required, push Pause button.
6. Adjust the Volume Control to the most satisfactory level.
To prevent "howling",hold the microphoneas far from the built-in speakers
as possible, or reduce the volume level by using the Volume Control.
NOTE: Do not leave CD in stop or pause mode, otherwise the public-address
system can not be used.
Instead of "MIC" jack, the "AUX IN"jack can be used.
13
1