Technical data

This section provides information about supported MIBs, OIDs, and traps by Dialogic

Diva

SNMPX and about the

relationship between supported OIDs and Dialogic

Diva

Media Board management interface variables.

OIDs provided by Diva SNMPX

MIB-II

(RFC

1213/2

233)

Path Description

MIB-II interfaces.ifTable.ifEntry.

ifIndex Unique index of Dialogic

Diva

interfaces starting with ifIndex-

offset + 1 (see option -oN). First, the installed Dialogic

Diva

Media Boards are listed, followed by the available B-channels.

ifDescr For Diva Media Boards, the board name and it's serial number are

returned. For B-channels, the string "BRI + ifIndex_of_adapter +

number_of_b- channel_on_adapter" is returned.

ifType The type of the interface according to IANA: PRI, BRI, ISDN

ifMTU Since the concept of MTU is not applicable on Diva interfaces,

they return 0.

ifSpeed The maximum interface speed in bps

ifAdminStatus Always up

ifOperStatus The current operating status of the interface

ifInBytes, ifInPackets,

ifInErrors, ifOutBytes,

ifOutPackets, ifOutErrors

For boards, the added values of the D- and B-channel interface

counters are returned. divactrl mantool reports these values in

the following paths "Statistics\\[D|B]- Layer2\\[R|X]-

[Bytes|Frames|Errors]".

For B-channels, the following values are reported:

"State\\B[n]\\L2 Stats\\R- [Bytes|Frames|Errors]".

ifPhysAddr Returns vendor-id, PnP-id, serial number of Diva Media Boards

formatted as hex string. Returns no information for B-channels.

LinkUp/LinkDown Traps For status changes of interfaces a trap is generated that includes

the appropriate ifOperStatus varbind. Trap destinations and

access parameters must be configured in the underlying master

agent (trapsink, etc.).

Reference: Supported OIDs