Technical data

61
The format of the plain text CONNECT command response can be controlled by the AT\V command.
Command responses
Meaning Direct form Numeric form
Command accepted OK 0
CONNECT 300 bps CONNECT, CONNECT 300 1
Ring indication RING 2
Carrier lost, switched back to
command mode
NO CARRIER 3
Invalid command, command was
not accepted
ERROR 4
CONNECT 1200 bps CONNECT, CONNECT 1200 5
Dial attempt failed (L1 error, L2
error, no free B-channel)
NO DIALTONE 6
Opposite side has rejected the call
or is busy
BUSY 7
No equipment on the opposite side
has answered the call
NO ANSWER 8
Successful connect to the opposite
side
CONNECT, CONNECT + speed and
norm. Depends on AT\V
9
See AT-command set on page 35 for more information on these commands.
If you select the numeric response format (ATV0), CONNECT will be indicated in numeric form in accordance
with the numeric CONNECT responses as described in the table below.
Numeric CONNECT responses
Connection speed Numeric response
14400 9
1200 10
2400 11
4800 12
9600 13
19200 14
38400 15
48000 16