Technical data

AT+FTD. Set current time and date

The AT+FTD command is used to set the current date and time. The current time and date should be set before

each fax transmit session. The syntax of the command is:

AT+FTD=year,month,hour,minute,second,zone,dtsdelta

Parameter Description

year The current year. Range: 1970 to 65535

month The current month number. Range: 1 to 12. January is 1.

day The current day of the month. Range: 1 to 31.

hour The current hour. Range: 0 to 23.

minute The current minute. Range 0 to 59.

second The current second. Range 0 to 59.

zone Reserved. Should be set to zero.

dtsdelta Reserved. Should be set to zero.

AT+FPH. Page header generation

The AT+FPH command is used to enable automatic generation of a Fax page header. There are three allowable

formats for the syntax of this command:

1. AT+FPH=mode,"left"

2. AT+FPH=mode,"left'middle'right"

3. AT+FPH=mode,"left'right"