Technical data

This guide provides a detailed description of how to install and configure the Dialogic

Diva

System Release

software, and how to troubleshoot your ISDN connection, if necessary. This guide covers the following subject

matter:

• The Diva System Release software features, supported hardware, and system requirements.

• Installation and configuration of the Diva System Release software with Dialogic

Diva

PRI, BRI, and

Analog Media Boards. Loading Dialogic

Diva

modules: TTY driver (analog, fax, V.110, and V.120

capabilities) and CAPI 2.0 support. Testing Diva Media Board function and connection.

• Configuring the Dialogic

Diva

TTY serial ports: AT commands to configure the Diva TTY serial ports,

setting up a Linux server to accept digital or analog connections.

• Uninstalling the Diva System Release software.

• Troubleshooting: ISDN trace utility and customer support procedure.

• Management interface description: Directories and variables that can be read, written, or used to generate

events and to control board status and configuration.

• Features: Overview of the functions provided by the various interfaces.

This guide does not describe the installation, configuration, and usage of the Dialogic

Diva

softSS7 software,

the Dialogic

Diva

SIPcontrol

™

software, or the Dialogic

Diva

softIP software. The documentation for these

products can be viewed in separate documents.

<Variable> Variables that must be entered are enclosed in angle brackets. Variables may consist of

numbers or other character strings.

[Opt] Optional entries are enclosed in square brackets. They may consist of variables, e.g.,

<number> and character strings.

a1|a2 Alternative entries are separated by a vertical line (pipe character).

Dialogic® Diva® System Release LIN Reference Guide

Syntax used throughout the guide