Specifications

28 Technical Specifications

Technical Specifications

Technical Data

• IBM PC, PC AT, and PS/2 Model 30 bus compatible

Hardware Installation

• Interrupt levels selectable via software (2, 3, 4, 5, 6, 7, 10, 11, 12, 14, 15)

• I/O address selectable via on-board switch (14 options)

• 4Kb shared memory access with a software selectable starting address

(48 options in the ranges of C000 to EF00 and FC000 to FEF00)

External Interface

Performance

• 2 Mbps full duplex per physical HSI port (V.35, X.21, NRZ, NRZI)

• 128 kbps per ISDN BRI port (over the “D” channel or the “B” channels)

Power Requirements

• 3 A at +5 Volts

• 80 mA at +12 Volts

• 50 mA at -12 Volts

Environmental Requirements

• Operating temperature: 0°C to 50°C

• Operating humidity: 0 to 90% (non-condensing)

• Barometric operating pressure: 86 to 106 kPascals

• Maximum tolerance in power supply variation: +5% to -5%

HSI Ports

• HSI ports connect to 26-pin high-density male connectors

• Support for V.24,X.21bis, and V.35

• X.21 with V.11 (X.27) signaling

• NRZ, NRZI, and FM data encoding

• Internal or external clocking (DTE or DCE) or split (transmit internal,

receive external)

Eiconcard CPU/Memory # of HSI Ports #of ISDN BRI Ports

Eiconcard S50 20 MHz Motorola 68302 /

2 MB RAM

1N/A

Eiconcard S51 20 MHz Motorola 68302 /

2 MB RAM

Eiconcard S52 20 MHz Motorola 68302 /

2 MB RAM

2N/A

Eiconcard External Interface

Eiconcard S50 One 26-pin “D Type” female ports.

Eiconcard S51 One 26-pin “D Type” female port and one DIN-4 female connector.

Eiconcard S52 Two 26-pin “D Type” female port.