User manual

Setup 16
Step 2: Log in to the Eicon 1550/1551
Whenever you wish to change settings on the Eicon 1550/1551, you must first log in
using a web browser, as shown below.
1. Launch your web browser.
2. Click ‘File’, ‘Open’, then enter the following IP address:
192.168.1.1
3. Click ‘OK’. You should see the ‘Log in’ page.
Note: If you do not see the ‘Log in’ page, see Troubleshooting on page 17.
4. Click the ‘Log in’ button.
Note: By default there is no password.