User manual

Alphabetical List of Supported AT Commands
DIVA T/A ISDN Modem Reference Guide
◆
Page 18
AT! Commands
AT!An Directory Number/Port Assignment (static) 31
AT!C1=n ISDN Switch Type (static) 32
AT!C4=n Enable/Disable Non-initializing mode for primary B-channel (North America
only) (static)
32
AT!C5=n Enable/Disable Non-initializing mode for second B-channel (North America
only) (static)
32
AT!C6=n ISDN SPID Number for primary B-channel (North America only) (static) 32
AT!C7=n ISDN SPID Number for second B-channel (North America only) (static) 32
AT!D1= n Specify Default DTE Speed. 32
AT!D2= n Specify Default Databits length 32
AT!D3= n Specify Default Parity 33
AT!D4= n Specify Default Number of Stopbits. 33
AT!E0=n V.120 N201 Tx (Maximum Transmit Frame Size) 42
AT!E1=n V.120 N201 Rx (Maximum Receive Frame Size) 42
AT!E2=n V.120 Multiframe Mode 42
AT!E3=n V.120 K Window Size 42
AT!E4=n V.120 T200 (Retransmission Timer) 42
AT!E5=n V.120 N200 (Maximum Retry Count) 43
AT!E6=n V.120 T203 (Link Integrity Timer) 43
AT!E7=n V.120 Idle Timer 43
AT!Ln Set ISDN Encoding Law 33
AT!N1=n ISDN Directory Number Assignments for 1st B-channel and 1st Phone port
(static)
33
AT!N2=n ISDN Directory Number Assignments for 2nd B-channel and 2nd Phone port
(static)
34
AT!N3=n ISDN Subaddress for 1st B-channel (static) 34
AT!N4=n ISDN Subaddress for 2nd B-channel (static) 34
AT!N5=n ISDN Directory Number for Data Ports (International only) (static) 34
AT!N6=n ISDN Subaddress for Data Ports (International only) (static) 34
AT!On Outgoing Call Type 35
AT!T1= n Incoming Call Assignment, First Directory Number 39
AT!T2= n Incoming Call Assignment, Second Directory Number 39
AT!V0=n V.110 Configuration Override (International version only) 44
AT!V1=n V.110 Stream Rate (International version only) 44
AT!V2=n V.110 Character Length (International version only) 44