Technical data

95
Debug Level MI_HINT W Upper limit of debug events to log
D-HW Txt
Mask
MI_BITFLD W D-channel hardware trace mask
B-HW Txt
Mask
MI_BITFLD W B-channel hardware trace mask
Misc Txt Mask MI_BITFLD W Trace mask for various use
Event Enable MI_BITFLD W Bit field to enable specific trace events
Max Log
Length
MI_UINT W Maximum number of data bytes in trace
Log Buffer MI_TRACE EVENT Trace information: L1, D-channel, B-channel and debug
information
Dialogic® Diva® TTY management interface directory (Port Manager)
The Dialogic® Diva® TTY driver management interface on page 135 is located in the TTY device driver. It
is structured like a virtual file space, containing directories and variables. Each directory and variable is
identified by its path and name. A path contains a directory name followed by a specific variable or subdirectory
that is separated by a backslash "\". TTY driver management interface is accessible via logical Dialogic
®
Diva
®
Media Board number 1001. The TTY driver provides only one management entity, and cannot be accessed by
multiple applications simultaneously. For this reason, the user should perform access in "exclusive" mode
(divactrl mantool -Exclusive -c 1001 -r). In exclusive mode, divactrl mantool will use the file lock to
synchronize the access to the management interface fully transparent to the caller.
You can use the management interface of the Dialogic
®
Diva
®
TTY driver to obtain information about the Diva
TTY driver, to change the configuration of the TTY driver and to view and to control the state of the Dialogic
®
Diva
®
TTY interfaces.