Technical data

65
Fax class 1 and Fax class 2 AT commands
The following list is an excerpt of the complete list.
Command Description
AT +FCLASS? Queries the configured modem class.
AT +FCLASS=? Displays the supported modem classes.
AT
+FCLASS=<n>
Configures the modem for modem class <n>. 0 - Data mode, 1 - EIA class 1, 2 - EIA
class 2
AT +FMFR? Returns the name of the modem manufacturer.
AT +FMDL? Returns the name of the modem model.
AT +FREV? Returns the product version.
AT +FLPL=<n> Control class 2 polling capability. 0 - Normal operation. 1 - Document available for polling.
AT +FTD See AT+FTD. Set current time and date below.
AT +FPH See AT+FPH. Page header generation below.
AT+FTD. Set current time and date
The AT+FTD command is used to set the current date and time. The current time and date should be set before
each fax transmit session. The syntax of the command is:
AT+FTD=year,month,hour,minute,second,zone,dtsdelta
Parameter Description
year The current year. Range: 1970 to 65535
month The current month number. Range: 1 to 12. January
is 1.
day The current day of the month. Range: 1 to 31.
hour The current hour. Range: 0 to 23.
minute The current minute. Range 0 to 59.
second The current second. Range 0 to 59.
zone Reserved. Should be set to zero.
dtsdelta Reserved. Should be set to zero.