Technical data

59
AT +iC[<n>]
<n> Determines whether the modem stays in command mode after call setup.
0 Stays in command mode.
1 Switches to data mode.
AT +iD<n> <n> Delay for AT-command response (ms).
0 AT-command response is sent immediately.
1 ...
255
AT-command response is delayed.
AT +iF<n> <n> RNA Framing. [e]
0 No framing check (pass data transparently).
1 Force synchronous conversation (PPP).
2 Force asynchronous conversation (PPP).
3 Force synchronous conversation (RAS).
4 Force asynchronous conversation (RAS).
5 Detects required conversation by analyzing incoming data packets.
AT +iG<bitmask> Bit V
a
l
u
e
RNA patches. Controls the behavior of the ASYNC/SYNC PPP conversion
module. See ASYNC/SYNC conversion module on page 70 for
details.
1 1 Reserved, should be zero.
2 2 Reserved, should be zero.
3 4 Reserved, should be zero.
4 8 Pass IPCP (default is track).
5 1
6
Force patch of IPCP.
6 3
2
Keep RX ACCM (default is add).
7 6
4
Keep TX ACCM (default is delete).
8 1
2
8
Pass LCP (default is track).