Technical data

9 Use an mgetty friendly format for CID indication in RING message [e]

14 HylaFax friendly format

RING

CID: XXX[/YYY]

DAD: HHH[/ZZZ]

RING

15 Use an mgetty friendly format for CID and DAD [a] indication in RING message [f]

Notes:

[a] CID (Calling Party Number) is indicated as: RING CID: <number>

[b] CID (Calling Party Number) is indicated as: CONNECT ... CID: <number>

[c] Indicated as: RING CID: <number> DAD: <number>

[d] Indicated as: CONNECT ... CID: <number> DAD: <number>

[e] Indicated as: RING;<number>

[f] Indicated as: RING;<number>;<number>

AT+ commands

AT command [a]

[b]

Description

AT +iA<number> Accepted address. Incoming calls are only accepted if the called party number equals

the phone number configured here. Addresses are compared backwards. So, if you

set the accepted address to 12, the called party numbers that end with 12, e.g., 12,

812, 384012, match the configured address. [c]

AT +iO<number> Origination address. This number is placed as the origination address. [c]

AT +iB<n>

<n> B-channel data adaptation rate [d]

2 1200 bps

3 2400 bps

4 4800 bps

5 9600 bps

6 19200 bps

7 38400 bps

8 48000 bps

9 56000 bps