Technical data

55
AT# commands
AT command Description
AT #CID=? Displays CID (Caller ID) setting. The short form of this command is "CID?".
AT
#CID=<n>
<n> Sets CID mode. The TTY indicates the origination (CID) and destination (DAD) number in the
RING and/or CONNECT message. This enables a server application for example to forward
incoming calls directly to their destination. [a]
0 No CID indication
1 CID indication in RING message [a]
2 CID indication in CONNECT message [b]
3 CID indication in RING and in CONNECT messages
5 CID and DAD (Destination Address [a]) indication in RING message [c]
6 CID and DAD [a] indication in CONNECT message [d]
7 CID and DAD [a] indication in RING and in CONNECT messages
9 Use an mgetty friendly format for CID indication in RING message [e]
14 HylaFax friendly format
RING
CID: XXX[/YYY]
DAD: HHH[/ZZZ]
RING
15 Use an mgetty friendly format for CID and DAD [a] indication in RING message [f]