Technical data

47
Testing the Dialogic® Diva® Media Board functionality and connectivity
The following procedures will help you to verify if the Dialogic
®
Diva
®
Media Board and the service are working
properly. After configuring and loading the drivers, it is recommended that you use one or more of the following
methods for testing:
• TTY Test
• ACOPY2 file server
• Testfax
TTY Test
This test allows you to test the Dialogic
®
Diva
®
Media Board and Dialogic
®
Diva
®
TTY interface functionality and
link integrity using various bearer protocols supported by your Diva Media Board.
The /usr/lib/opendiva/divas/tty_test utility is located in the /usr/lib/opendiva/divas directory. On the server side,
type: /usr/lib/opendiva/divas/tty_test 1 s auto. On the client side, type:
/usr/lib/opendiva/divas/tty_test 2 <ISDNnumber> x75. The transfer rate will appear in real time and be
updated every time 64 Kbytes of data have been transferred.
Note: Many other options, e.g., bearer protocol, packet size, rate adaptation, are available for the TTY test.
Type /usr/lib/opendiva/divas/tty_test for a full list or refer to the section tty_test utility on page 112 in
this document.
ACOPY2 file server
This tool allows you to test the Dialogic
®
Diva
®
Media Board and CAPI 2.0 interface functionality and link
integrity using the X.75/T.70NL bearer protocol. The acopy2 utility is located in the /usr/lib/opendiva/divas
directory.
Note: Many other options, e.g., packet size, CPN, SubAddress, and commands are available. Type
/usr/lib/opendiva/divas/acopy2 for a full list.
On the server side, type: /usr/lib/opendiva/divas/acopy2 -c<X> -serve /p2048, where 2048 is the packet
size for beneficial results and <X> is the CAPI board number that will receive the call.
On the client side, type: /usr/lib/opendiva/divas/acopy2 -c<Y> - n<ISDNnumber>:file2 file1 /p2048,
where 2048 is the packet size for beneficial results and <Y> is the CAPI board number that will issue the call.
Testfax
This tool allows you to test Dialogic
®
Diva
®
Media Board and CAPI 2.0 interface functionality and link integrity
using the Fax G3 bearer protocol.
The TESTFAX utility is located in the /usr/lib/opendiva/divas directory.
On the server side, type: /usr/lib/opendiva/divas/testfax -serve -c<X>, where <X> is the CAPI board
number that will receive the call.
Note: Many other options, e.g., packet size, transmission speed, ECM, SEP/SUB/PWD, compression, fax ID,
headline, and commands, are available. Call /usr/lib/opendiva/divas/testfax for a full list.