Technical data

Depending on the installed board and the selected D-channel protocol, you might need to configure various

advanced parameters. To do so, set View extended configuration to Yes and modify the advanced

parameters as required. For further information on advanced parameters, see the online help topic of the

respective parameter.

When the board configuration is complete, the Dialogic

Diva

WEB Configuration Wizard stores the parameters

list, generates a startup shell script and tries to update the modified parameters via the management interface.

If updating via the management interface is not possible, for example, the board is not running or the

configuration parameter is not supported by the management interface, the Diva WEB Configuration Wizard

prompts you to restart the board.

To restart the board, you can either:

• select in the Board configuration main page Start hardware from the dropdown menu next to the Diva

Media Board, or

• set in System configuration page the option Start driver on system boot to Yes, which allows for

starting or restarting the Diva Media Boards at once.

Note: Restarting the Dialogic

Diva

Media Board clears the active connections of this board.

Control and Monitoring

If you select the Hardware status/management icon, you will gain access to the:

• current status of the Dialogic

Diva

Media Board, which allows you to view hardware-related settings and to

control the state of the Diva Media Board.

• Diva board startup log, which allows you to view the board's configuration as seen by the selected Diva

Media Board.

• "XLOG" trace snapshot, which allows you to receive a small snapshot of the board traces for the trace ring

buffer, located in the Diva Media Board memory.

• Line monitor, which allows you to view the status of active connections on the selected board and to clear

these connections, if necessary.

• Management interface browser, which allows you to walk through the board management interface and view

or modify management interface variables or execute management interface functions.

• Management interface browser, which allows you to walk through the Dialogic

Diva

TTY driver

management interface and view or modify management interface variables or execute management

interface functions (Port Manager).

• Management interface browser, which allows you to walk through the Dialogic

Diva

CAPI driver

management interface and view or modify management interface variables or execute management

interface functions.

• Report based on the information from the board management interface that provides an overview over the

Diva Media Board's link status, link quality and over the call-related statistics.