Technical data

36
To activate the license
The date set in the system settings of your computer must be correct. Otherwise, you cannot add your license
file.
1. Open the Dialogic
®
Diva
®
web interface and click License Management on the lower left side of the
interface.
2. Go to the product for which you want to activate the license and click Browse next to Upload <product>
license file.
3. Go to the directory where you saved the license key file, select it, and click Open.
4. Click Upload to activate the license file.
5. The license file is shown for each product under Installed license files.
Now, the functionality is unlocked for the feature set you acquired with your license.
The Config script (located in the /usr/lib/opendiva/divas directory) is a setup wizard that detects the installed
Dialogic
®
Diva
®
Media Boards and additional applications.
The setup wizard generates the divas_cfg.rc file (located in the /usr/lib/eicon/divas directory) that is used to
start the Diva Media Boards, interface drivers, and additional software at system startup or to start the
components manually. You can use the script /usr/lib/opendiva/divas/Start to load and
/usr/lib/opendiva/divas/Stop to unload the software manually.
The setup wizard creates the necessary device nodes in the /dev directory:
• /dev/capi20 is used to access the CAPI 2.0 interface
• /dev/ttyds01 ... /dev/ttyds<n> is used to access the Dialogic
®
Diva
®
TTY interface, where <n> is the sum of
B-channels of the installed Diva Media Boards.
You can either use the Config script or the web-based Dialogic
®
Diva
®
Configuration Wizard to configure the
settings for your Diva Media Boards. The following description of configuration options is based on the web-
based Diva Configuration Wizard. It is structured as follows:
• Post installation settings: Steps to be performed immediately after the installation.
• System and Diva Media Board configuration: Configuration of the major parts of the product that depend on
the type of your application and the switch type that the Diva board is using. Configuration of application
and switch type-dependent parameters that allow you to increase the performance of the system or access
switch-specific services. Configuration of number ranges, peers, protocol-specific settings and startup
options.
• Control and monitoring: Control Diva Media Board configuration, status and performance data.
• Maintenance: Initiate trace process, create, view, and download trace files.
Configuring the Dialogic® Diva® System Release Software