Technical data

168
Use of the Dialogic® Diva® System Release Software in a Customized Environment
Once the .bin files (binary files) are installed, the modules still have to be translated for the running kernel.
Base drivers
The following drivers are available as source code under GPL license:
• divadidd.[k]o
• divas.[k]o
• diva_mnt.[k]o
• diva_idi.[k]o
• kernelcapi.[k]o
• divacapi.[k]o
• capi.[k]o
They can be compiled for a specific kernel using the source level package.
Build procedure
To build base Dialogic
®
Diva
®
drivers, proceed as described below:
1. Install kernel sources.
2. Create the symbolic link /usr/src/linux that points to the kernel source code.
3. Apply the kernel patches (if necessary).
4. Install the Dialogic
®
Diva
®
source level package available as download. Follow the instructions of the
respective installation readme, which can be found on the download page.
5. Change to the directory /usr/lib/eicon/divas/src.
6. Invoke the command: ./Build.
7. The automated build procedure will compile the necessary kernel modules and utilities. Follow the
instructions on the screen.
8. After successful completion of the build procedure, the drivers are installed and you can proceed with the
configuration as described above.