Technical data

163
Supplementary services of Dialogic® Diva® BRI and PRI Media Boards
per switch
The Dialogic
®
Diva
®
System Release software supports basic call services for the available switch types. In
addition to this, it offers supplementary services for the following switch types:
• Euro-ISDN (ETSI) BRI and PRI
• 5ESS Custom (AT&T)
• 5ESS NI (Lucent/Avaya)
• DMS 100 (Nortel)
• Q.SIG
Q.SIG support is available for the derivatives ETSI-SS, ECMA-QSIG, and ETSI- QSIG. Thus, the Q.SIG switch
type can be used with any PBX based on one of these derivatives. Q.SIG has been tested with a number of
various switches, for example, Hicom 150, Hicom 300, Lucent Definity, Alcatel 4200, Alcatel 4400, Ericsson MD
110, Nortel Meridian, and Nortel M65xx.
The table below gives a detailed overview of the supplementary services supported by the switch types listed
above. The availability of supplementary services also depends on your PBX. For detailed information on
supplementary services supported by your PBX, contact the PBX manufacturer.
Supplementary Service Euro-
ISDN
(ETSI
) PRI
Euro
-
ISD
N
(ETS
I)
BRI
Q.SIG 5ESS
Custom,
5ESS
NI, DMS
100
MSN (multiple subscriber number) • • • •
(incomin
g)
DDI (direct dialing-in) • • • •
SUB (sub-addressing) • • • •
CLIP (calling line identification presentation) • • • •
CLIR (calling line identification restriction) • • • •
COLP (connected line identification presentation) • • • •
COLR (connected line identification restriction) • • • •
CCBS (call completion to busy subscriber) • •
CCNR (call completion on no reply) • •
KEY (keypad protocol) • • • [a] •
TP (terminal portability) • •
Call forwarding unconditional •