Technical data

124
Use the Restart symbol to restart. In the drop-down menu on the right of the Diva Media Board description you
can select different options:
• Select Configuration to start the configuration of the selected Diva Media Board and a screen similar to the
one shown below is displayed.
• When you select Identify on, the LEDs of the Diva Media Board are set to blink so that you can simply
identify the board for connecting it to the correct cable.
• When you select Disable hardware, the Diva Media Board is unloaded from the system and layer 1 gets
disconnected.
• You can also select the M-Board the Diva Media Board should be added to.
As soon as the configuration process is complete, click Save to update the Diva Media Board configuration. The
Diva Media Board configuration utility tries to update the changed configuration parameters on demand, i.e.,
without board restart. If the changed parameters cannot be updated in this way, the Dialogic
®
Diva
®
WEB server
will ask you to restart the Diva Media Board.