Technical data

102
ifType The type of the interface according to IANA: PRI, BRI, ISDN
ifMTU Since the concept of MTU is not applicable on Diva interfaces,
they return 0.
ifSpeed The maximum interface speed in bps
ifAdminStatus Always up
ifOperStatus The current operating status of the interface
ifInBytes, ifInPackets,
ifInErrors, ifOutBytes,
ifOutPackets, ifOutErrors
For boards, the added values of the D- and B-channel interface
counters are returned. divactrl mantool reports these values
in the following paths "Statistics\\[D|B]- Layer2\\[R|X]-
[Bytes|Frames|Errors]".
For B-channels, the following values are reported:
"State\\B[n]\\L2 Stats\\R- [Bytes|Frames|Errors]".
ifPhysAddr Returns vendor-id, PnP-id, serial number of Diva Media Boards
formatted as hex string. Returns no information for B-
channels.
LinkUp/LinkDown Traps For status changes of interfaces a trap is generated that
includes the appropriate ifOperStatus varbind. Trap
destinations and access parameters must be configured in the
underlying master agent (trapsink, etc.).
ISDN-MIB
(RFC2127)
transmission.isdnMib.isdn
MibObjects.isdnSignaling
Group
isdnSignalingGetIndex Number of possible D-channels (equals number of installed
Diva Media Boards)
ISDN-MIB transmission.isdnMib.isdn
MibObjects.isdnBasicRate
Group
.isdnBasicRateTable.isdnB
asicRateEntry
Dialogic
®
Diva
®
BRI Media Boards
isdnBasicRateIfType isdns or isdnu (IANA-ifType 75, 76)
isdnBasicRateLineTopolog
y
pointToPoint or pointToMultipoint
isdnBasicRateIfMode TE mode or NT mode
isdnBasicRateSignalMode D-channel active or inactive