Technical data

101
Activation of Dialogic® Diva® SNMP support
You can activate Diva SNMP support using the WEB-based System configuration or using the console-based
Config application.
You can activate the Diva SNMP extension manually with the following command:
/usr/lib/opendiva/divas/divasnmpx. If there is a master SNMP agent running, divasnmpx attaches to its
AgentX socket /var/agentx/master. On failure, it retries to open the socket every 10 seconds. This also applies
during shutdown/restart of the SNMP master agent: Dialogic
®
Diva
®
SNMPX automatically reattaches to the
master socket as soon as it is available again.
Diva SNMPX automatically detects the start of new Dialogic
®
Diva
®
Media Boards and the shutdown of existing
Diva Media Boards and uses interface state traps to indicate these events to the management application.
Command line options:
-f Do not fork into background. Error messages are logged to stdout instead of syslog. Exit with "q"
or "CTRL-C".
-s No error logging. Disable logging of error messages to syslog or stdout, depending on operating
mode.
-oN Specify offset for ifIndex. The Dialogic
®
Diva
®
System Release software entries in MIB-II's
interfaces.ifTable are indexed by a number starting from this offset + 1. Default value is "-
o100".
-oN -h Command line help.
This section provides information about supported MIBs, OIDs, and traps by Dialogic
®
Diva
®
SNMPX and about the
relationship between supported OIDs and Dialogic
®
Diva
®
Media Board management interface variables.
OIDs provided by Diva SNMPX
MIB-II (RFC
1213/2233)
Path Description
MIB-II interfaces.ifTable.ifEntry.
ifIndex Unique index of Dialogic
®
Diva
®
interfaces starting with ifIndex-
offset + 1 (see option -oN). First, the installed Dialogic
®
Diva
®
Media Boards are listed, followed by the available B-channels.
ifDescr For Diva Media Boards, the board name and it's serial number
are returned. For B-channels, the string "BRI +
ifIndex_of_adapter + number_of_b- channel_on_adapter" is
returned.
Reference: Supported OIDs