Specifications

International Regulatory Information
◆
◆◆
◆
70
(REN) of the equipment connected to your line; this information is listed on the equipment label.
The sum of all the REN’s on your telephone line should be less than five to ensure proper service
from the telephone company.
ISDN Interface
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device to send any message via a telephone facsimile machine unless such
message clearly contains, in a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification of the business, other
entity, or individual sending the message and the telephone number of the sending machine or such
business, other entity, or individual.
To program this information into your facsimile, refer to the instructions in your facsimile software
manual.
If Problems Arise
If your telephone equipment is not operating properly, immediately remove it from the telephone
line, as it may harm the telephone network. If the telephone company notes a problem, it may
temporarily discontinue service. When practical, it will notify you in advance of this disconnection.
If advance notice is not feasible, you will be notified as soon as possible. When you are notified, you
will be given the opportunity to correct the problem and informed of your right to file a complaint with
the FCC.
If repairs are needed on your Diva Mobile PC Card they should be performed by Eicon Networks.
For information, contact Eicon Networks at the address or phone number listed in Declaration of
Conformity on page 68.
Installation
The Eicon Networks products provide all the connections necessary for proper operation.
Connection to the telephone network should be made with standard RJ-11C modular cords that
connect to the jacks or the product. Please see the instructions in the installation section for your
system (see the printed Diva Mobile QuickStart).
Regulatory Information for Canada
NOTICE: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operational and safety
requirements. Industry Canada does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. In some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of certified connector assembly (telephone
extension cord). The customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Facility
Interface code
Digital Reg.
code
Service Order
code
USOC Jack
Type
S/T 02IS5 XD 6.0P N/A