Specifications
Travelling to a New Location
◆
◆◆
◆
47
3. Select the ‘Switch Type’ specified by your ISDN service provider (some ISDN service
providers refer to the switch type as ‘ISDN D-channel protocol’).
In general:
• In Europe, select ‘DSS1 - EuroISDN’ (commonly referred to as ETSI standard).
• In North America, select ‘North America Auto-detect’.
Click ‘Next’.
4. Enter the ISDN phone numbers (excluding the area code) specified by your ISDN
service provider. Enter each number directly, without spaces or hyphens.
Note: If you do not plan to receive calls (that is, if you plan to make outgoing calls
only), then you do not have to enter ISDN phone numbers.
5. North America only: Enter the corresponding SPIDs (Service Profile Identifier)
specified by your ISDN service provider. Enter each number directly, without spaces
or hyphens. Depending on your switch type, you have to enter either one or two SPIDs
for your ISDN line.
6. Click ‘Next’.
7. Keep the existing settings in all additional screens.
8. Restart your computer to effect your changes.
Under Windows 2000/XP
1. From the desktop, right-click ‘My Computer’.
2. In the ‘Computer Management’ dialog box, click ‘Manage’.
3. In the ‘Tr ee ’ tab, under ‘System Tools’, select ‘Device Manager’ and then, in the right
pane, expand ‘Network Adapters’ and select the modem that you want to modify.
4. In the Diva Mobile Properties dialog box, click the ‘ISDN’ tab and select your switch
type or D-channel protocol.
5. Click ‘Configure’ and enter the appropriate information. For example, in North
America, you may need to enter new ISDN phone numbers or a new SPID.
6. Click ‘OK’.
7. Click ‘OK’ to close the properties dialog box.
Under Windows NT
1. Open the ‘Network’ dialog box: click ‘Start > Settings > Control Panel’. Double-click
the ‘Network’ icon.
2. In the ‘Network’ dialog box, click the ‘Adapters’ tab.
3. Select ‘Eicon Diva Mobile ISDN-V.90 combo card’, then click ‘Properties’.
4. In the Diva Mobile for Windows NT setup wizard, click ‘Next’.
5. Do not change any hardware resources in the displayed screen.
Click ‘Next’.