Specifications

Installing Diva Mobile for Windows NT

◆

◆◆

◆

Install and configure Remote Access Service (RAS)

1. In the displayed message box, click ‘Ye s ’ to install RAS (if it is not installed) and

configure it.

Note: If you install RAS, you must reinstall Windows NT Service Pack 3 (or higher)

after completing this installation.

2. If the ‘Eicon WAN-Miniport Driver Setup’ dialog box appears: Insert your Windows NT

CD-ROM or Setup diskette into an appropriate drive, and do the following:

3. Click ‘Continue’.

4. If the ‘Remote Access Setup’ dialog box appears: In the ‘Remote Access Setup’ dialog

box, do the following:

5. In the ‘Add RAS Device’ dialog box, do the following:

6. In the ‘Remote Access Setup’ dialog box, select ‘ISDN1 DIWAN’, then click

‘Configure’.

Type D:\I386 (where D corresponds to the drive that contains the

Windows NT CD or setup diskette).

Click ‘Add’.

Select ‘ISDN1-DIWAN’, then click ‘OK’. This adds the first ISDN port.