Specifications

Installing Diva Mobile for Windows NT
◆
◆◆
◆
32
9. Select the hardware resources assigned to Diva Mobile. You noted these settings
before you began the installation.
• Interrupt Number: Specify the interrupt number you noted (even if an asterisk
indicates that it is already in use; it is being used by Diva Mobile).
• I/O Port Base Address: Keep the default value.
• I/O Port Base Address (modem): Specify the value you noted (even if an asterisk
indicates that it is already in use; it is being used by Diva Mobile).
• Memory Address: Keep the default value.
Note: If your notebook uses card-and-socket services, you may not be able to select
hardware resources as described in this step. If this is the case, refer to the manual
included with your notebook for more information on installing PC cards. If your
notebook uses card-and-socket services, a corresponding icon is shown in the system
tray.
10. Click ‘Next’.
11. Select the appropriate ISDN ‘Switch Type’, then click ‘Next’.
12. North America only: Enter your ISDN telephone numbers (excluding the area code)
specified by your ISDN service provider. Enter the numbers without spaces or
hyphens.
Enter the corresponding SPIDs (Service Profile Identifiers) specified by your ISDN
service provider. Enter the numbers without spaces or hyphens. Depending on your
switch type, you have to enter either one or two SPID numbers for your ISDN line.
13. Click ‘Next’.
14. Select the ISDN modems you want to use with Diva Mobile:
*For the V.120 and the X.75 modems, you must choose the modem that corresponds
to the required connection speed — 56 or 64 kbps. Note that when connecting to
certain locations, some switches do not support 64 kbps connections and you must
limit the speed to 56 kbps. If you are not sure which connection speed is required,
install both modems for the required type.
Note: The V.90 analogue modem is automatically installed.
15. Click ‘Next’.
16. Click ‘Finish’. The setup program copies files to your notebook.
Note: The WAN-Miniport driver is automatically installed. The WAN-Miniport driver allows
you to use Dial-Up Networking over ISDN.
Modem Description
V.120 modem* Use this modem in conjunction with certain asynchronous terminal
applications.
X.75 modem* Use this modem to connect to certain ISDN bulletin board systems in
Europe.
BTX modem Use this modem in conjunction with banking applications in Germany, such
as Amaris or Microsoft Money.