Specifications

Installing Diva Mobile for Windows NT
◆
◆◆
◆
31
6. In the ‘Eicon Diva Mobile V.90 Properties’ dialog box, do the following:
7. Click ‘OK’.
8. Click ‘OK’ to close the ‘PC Card (PCMCIA) Devices’ dialog box.
Install the drivers and configure Diva Mobile for Windows NT
1. Insert the Diva Mobile Software Suite CD into your CD-ROM drive.
2. Click ‘Start > Run’.
3. In the ‘Run’ dialog box, type
D
:\
CDSETUP
.
EXE
(where D is your CD-ROM drive letter)
and then click ‘OK’.
4. In the Diva Mobile Software Suite Welcome screen, click ‘Getting Started’.
5. If required, select ‘Windows NT 4.0’ under ‘Select an operating system’.
6. Click ‘Install Diva Software’. The setup program copies files to your computer.
7. In the ‘Select OEM Option’ dialog box, do the following:
8. In the Diva Mobile for Windows NT wizard, click ‘Next’.
Click the ‘Resources’ tab.
Write down the setting or range for each ‘Resource Type’. You will need to
specify these settings later when you configure Diva Mobile for Windows NT.
Select ‘Eicon DIVA Mobile ISDN-V.90 combo card’.
Click ‘OK’.