Specifications

Installing Diva Mobile for Windows NT
◆
◆◆
◆
30
1. Install the card and socket services software as described in the manufacturer’s
documentation.
2. Restart your notebook.
3. When the ‘Diagnostics’ wizard appears, click ‘Next’, click ‘Next’ again, then click
‘Finish’.
4. Restart your notebook again.
5. Plug the ISDN dongle into your adapter (see the illustration in ‘To install Diva Mobile
under Windows 98/Me/2000/XP’ on page 3).
6. After you logon to Windows NT, insert your adapter into an available PCMCIA TYPE
II slot.
7. When a ‘PCMCIA Card Insertion’ dialog box appears, select ‘Manually install the driver
for this card’, then click ‘OK’.
8. In the ‘Select OEM Option’ dialog box, click ‘Network Adapter’, then click ‘OK’.
9. Install the Diva Mobile for Windows NT software as described below.
Installing the Diva Mobile for Windows NT software
Determine the hardware resources assigned to Diva Mobile
1. After you have installed Diva Mobile as described in Installing the Diva Mobile V.90
PC Card, turn on your notebook (if it is not already on).
2. At the Windows NT console, logon as Administrator or equivalent.
3. Open the ‘PC Card (PCMCIA) Devices’ dialog box: click ‘Start > Settings > Control
Panel’, and then double-click the ‘PC Card (PCMCIA)’ icon.
4. In the ‘PC Card (PCMCIA) Devices’ dialog box, click the ‘Socket Status’ tab.
5. Select ‘Eicon Diva Mobile V.90’, then click ‘Properties’.
Important: The following procedures assume that Windows NT Networking is already
installed and configured on your notebook. If it is not, see Configuring Windows NT
Networking on page 26.